Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
›››<br />
Machine Features<br />
1.2m, 1.6m and 2.0m cutting widths<br />
Three-point linkage mounting<br />
Front-mounting option<br />
Heavy-duty construction<br />
600mm (2’) hydraulic offset adjustment<br />
120O of head movement<br />
Over-run PTO protection<br />
Rear roller height adjustment<br />
Replaceable full-length skids<br />
Cutting height of 40mm - 155mm<br />
Maximum cutting diameter<br />
Left or right-hand cut options<br />
Hydraulic floatation system<br />
Hydraulic safety breakaway<br />
Markets<br />
››› Verge Mowing<br />
››› Verge Mowing<br />
Agricultural<br />
Governmental<br />
Contractors<br />
Description<br />
Cutting width Maximum width of cut (m)<br />
2.0m<br />
2.0 (6’ 7”)<br />
HP requirement Minimum hp requirement of tractor<br />
70<br />
Tractor Requirements<br />
Attachment<br />
Weight<br />
3-Point Linkage (CAT II or III)<br />
Weight of machine (kg)<br />
3 Point Linkage<br />
900<br />
60hp minimum tractor horse-<br />
Cutting range (mm)<br />
PTO speed<br />
Maximum and minimum cutting heights<br />
Maximum RPM of PTO shaft<br />
40 - 155<br />
540/1000<br />
power (dependent on model)<br />
Rotor speed Centre (measured in m per min)<br />
2000rpm<br />
Three-point linkage mounting<br />
Number of flails J flails on twisted shackle or back-to-back flail<br />
66<br />
-60o Maximum downward movement<br />
+90o 1.6m<br />
1.6 (5’ 3”)<br />
60<br />
3 Point Linkage<br />
822<br />
40 - 155<br />
540/1000<br />
2000rpm<br />
48<br />
-60<br />
Maximum upward movement<br />
o<br />
+90o 1.2m<br />
1.2 (3’ 11”)<br />
50<br />
3 Point Linkage<br />
TBC<br />
40 - 155<br />
540/1000<br />
2000rpm<br />
38<br />
+90o -60 o<br />
MERLIN XTREME OFFSET<br />
131
Change language