POSIFLEX ZEAZ, ZEAU(U)Z ZEBZ, ZEBU(U)Z - Tschan GmbH

12 EC-Declaration of Conformity
to confirm the compliance of a sub-assembly with the
ATEX Directive 94/9/EC (ATEX 95), Annex X.B
The manufacturer
TSCHAN GmbH, Zweibrücker Straße 104, DE 66538 Neunkirchen-Saar
declares that the following sub-assembly
of type torsionally rigid shaft coupling
POSIFLEX ® ZEAZ, ZEAU(U)Z, ZEBZ, ZEBU(U)Z
Serial number: see delivery documents
Identification:
C E II 2 G T4/T5/T6 –20°C ≤ Ta ≤ +65°C/+55°C/+40°C
and E II 2 D T105°C
- complies with the provisions of the following harmonized standards valid at the date of signature:
EN 1127-1 Explosive atmospheres, explosion prevention and protection,
Part 1: Basic concepts and methodology
EN 1127-2 Explosive atmospheres, explosion prevention and protection,
Part 2: Basic concepts and methodology for mining
EN 13463-1 Non-electrical equipment intended for use in potentially explosive atmospheres,
part 1: Basic methods and requirements
EN 13463-5 Non-electrical equipment intended for use in potentially explosive atmospheres,
part 5: Protection by constructional safety
EN 1710 Equipment and components intended for use in potentially explosive
atmospheres in underground mines
- and also complies with the following European and national standards and technical provisions
valid at the date of signature:
Technical safety regulations
TRBS 2153
Neunkirchen, 29.12.2009
Avoidance of ignition hazards resulting from electrostatic
charging
Norbert Telaar
General Manager
i. V. Volker Carl
Technical Director
TSCHAN GmbH Zweibrücker Straße 104 D-66538 Neunkirchen-Saar
Telefon: +49(0) 6821 866 0 Fax: +49(0) 6821 883 53 www.tschan.de