OPERATORS MANUAL - Westerbeke

Engine Type
Aspiration
Governor
Combustion Chamber
Bore & Stroke
Piston Displacement
Firing Order
Direction of Rotation
Maximum Torque
(at 1800 rpm)
Compression Ratio
Dimensions
Weight
SPECIFICATIONS
WESTERBEKE 32 KW BEDA GENERATOR
SPECIFICATIONS
Diesel, four-cycle, four-cylinder, fresh
water-cooled, Vertical, in-line overhead valve
mechanism (46 hp at 1800 rpm maximum).
Naturally aspirated.
Electronic Governing
Swirl type
3.94 x 4.33 inches (100.1 x 110.0 mm)
210.8 cubic inches (3.5 liters)
1 - 3 - 4 - 2
Clockwise, when viewed from the front
1661b-ft (23 kg-m)
18:1
Height:
Width:
Length:
30.0 inches
22.0 inches
44.6 inches
10381bs (471.8 kgs)
TUNE·UP SPECIFICATIONS
Compression Pressure 427 psi (30 kg/eml) at 200 rpm
(limit of difference between
cylinde,,) 47.2 psi (3.0 kg/cm'l)
Valve Timing
Engine liming
Injector Pressure
Valve Seat Angle
Valve Clearance
(engine cold)
Engine Speed
Intake Opens 19" BTDC
Intake Closes 47° ABDC
Exhaust Opens 52" BBDC
Exhaust Closes 14' ATDC
Static timed - drop valve method
0.180 ± .005 inches BTDC
2450 ± 35 psi (1 + 5-0 kg/cm')
Intake 45"
Exhaust 30°
(762.0 mm)
(558.8 mm)
(113.3 mm)
Intake 0.012 inches (0.3 mm)
Exhausl 0.014 inches (0.35 mm)
1800 RPM 60 Hertz
1500 RPM 50 Hertz
General
Fuel
Fuellnjeclion Pump
Fuellnjeclion Timing
Nozzle
Fuel Filter
(on engine)
Air cleaner
Air Flow
(engine combustion)
General
Operating Temperature
Fresh Water Pump
Raw Water Pump
Raw Water Flow,
at 1800 rpm
System Capacity
(fresh water)
General
Oil Filler
Sump CapaCity
(not including filter)
Operating Oil Pressure
(engine hot)
0,1 Grade
Engines & Generators
47
FUEL SYSTEM
Open flow, self priming - 1 bleed point
No.2 diesel oil (cetane rating of 45 or higher)
ZEXEL Model PE (In-Line)
12" BTDC
Orifice type
Full Flow Replaceable
Metal screen type - cleanable
110 cfm (3.1 cmm)
COOLING SYSTEM
Fresh water-cooled block, thermostaticallycontrolled
with heat exchanger.
170 -190" F (77 - 88" C)
Centrifugal type, metal impeller, belt-driven
Positive displacement, rubber impeller,
belt driven.
15.0 gpm (567 Ipm) (measured
before discharging into exhaust elbow).
8.5 qts (8.04 lite,,)
LUBRICATION SYSTEM
Pressure led system
Full flow, paper element, spin-on type
6.3 U.S. qts (6.0 liters)
plus filter/cooler assembly
50-60 pSi (3.5 - 4.2 kg/cm')
API Specification of CF or CG-4,
SAE 30, lOW-3D, 15W-40