600 RUSH 800 RUSH - Polaris
600 RUSH 800 RUSH - Polaris
600 RUSH 800 RUSH - Polaris
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PRE-RIDE INSPECTIONS<br />
Start the Engine and Check<br />
Before starting the engine, always refer to all safety warnings pertaining<br />
to snowmobile operation. Never engage the starter when the engine is<br />
running. Never start the engine without checking all vehicle components<br />
to be sure of proper operation. See Before Starting the Engine beginning<br />
on page 56.<br />
n Engine Stop Switch<br />
Check the auxiliary shut-off switch for proper operation. Push the<br />
switch down to stop the engine. Pull it up to allow restarting.<br />
n Ignition Switch<br />
Make sure the engine stops when the ignition switch is turned to OFF.<br />
n Tether Switch (if equipped)<br />
If your snowmobile has a tether switch, remove the tether from the<br />
switch to make sure the engine stops immediately.<br />
n Lighting<br />
Check the headlight (high and low beam), taillight, and brake light.<br />
Replace burned out lamps before operating.<br />
n Mirrors (if equipped)<br />
Adjust the mirrors so they can be used to their full advantage.<br />
n Operating Area<br />
Before driving away, check your surroundings. Be aware of obstacles<br />
and make sure bystanders are a safe distance from the snowmobile.<br />
60