600 RUSH 800 RUSH - Polaris
600 RUSH 800 RUSH - Polaris
600 RUSH 800 RUSH - Polaris
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MAINTENANCE<br />
Brakes<br />
Hydraulic Brake Inspection<br />
Inspect the brake lever reserve before each use of the snowmobile. See<br />
page 57.<br />
Brake pads must be replaced when the brake pad material becomes thinner<br />
than the backing plate (approximately 1/16I). A kit is available for<br />
replacing brake pads. See your dealer.<br />
WARNING! Brake failure during operation can result in serious injury or death.<br />
Properly functioning brakes are vital to your safety. Be sure the brake pads do<br />
not drag on the disc and that brake lever travel is not excessive. Always replace<br />
brake pads when the brake pad material becomes thinner than the backing plate<br />
(approximately 1/16I).<br />
Brake Components<br />
1. Brake Caliper<br />
2. Brake Disc<br />
3. Brake Pad Material (Replace when<br />
thickness is less than 1/16I/1.5 mm).<br />
Excessive Lever Travel<br />
Hydraulic brakes are self-adjusting, but if<br />
excessive brake pad clearance develops,<br />
bring the snowmobile to an authorized<br />
POLARIS dealer for inspection and<br />
adjustment.<br />
90<br />
1 3<br />
2
Change language