23.03.2013 Views

Donnington Priory Salerooms

Donnington Priory Salerooms

Donnington Priory Salerooms

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

32<br />

32<br />

A steel 6mm watchmaker’s lathe<br />

Unsigned, German or Swiss, early 20th century<br />

With channelled round-section steel bed applied with onepiece<br />

headstock enclosing three graduated drive pulleys to<br />

the spindle, with simple toolrest, compound X and Y<br />

adjustable toolpost and tailpost with adjustable spindle,<br />

mounted via a tongue to the underside of the headstock onto<br />

an adjustable foot drilled with holes to the base flange for<br />

bench mounting, the bed 25cm long, with a conforming<br />

bench mounting transmission pulley post, (2).<br />

Details such as the channelled round-section bed shape of<br />

the casting for the headstock suggests that this lathe was<br />

possibly made by Lorch, Schmidt & Co.<br />

£120-180<br />

33<br />

33<br />

A German steel staking tool and four Swiss turns<br />

Various makers, 20th century<br />

The finely engineered nickel finish steel staking tool stamped<br />

Germany to underside, in original box with an extensive<br />

selection of stakes, the box 18cm wide; with another staking<br />

tool and two various boxed sets of stakes; and four near<br />

identical Swiss steel watchmaker’s turns including a boxed<br />

example stamped FAVOURITE with 17cm bed adjustable<br />

poppets and a small selection of accessories, (one turn<br />

incomplete, another lacking toolrest), (8).<br />

£70-100<br />

01635 553553<br />

34<br />

34<br />

A Collection of brass-framed watchmaker’s tools<br />

Various makers, English and Swiss, 19th century<br />

Comprising a Lancashire pivoting tool with one-piece frame<br />

16cm long; a Swiss Jacot tool (incomplete); two screw<br />

head tools (both incomplete); a mainspring winder (lacking<br />

top bar); a depthing tool; two brass pivot frames stamped<br />

FENN; another unmarked; a small cased pivoting tool and<br />

one other item (11).<br />

£100-150<br />

35<br />

35<br />

Three similar Swiss steel turns<br />

Two by L. Hugonoit-Tissot, 19th century<br />

Each with rectangular section bed mounted with shaped<br />

poppets and toolrest, the larger 24cm long the two smaller<br />

examples stamped L. HUGONIOT-TISSOT and L.H.T.,<br />

17.5cm long, with an extensive selection of accessories<br />

including runners, a graduated set of pulley wheel arbors,<br />

screw ferrules etc, (qty).<br />

£80-120<br />

15

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!