click here to view & download the full - Matthews Studio Equipment

HARDWARE
ACCESSORIES
AFFLAC CLAMP
The AFFLAC Clamp was designed by Matthews to hold small reflector cards,
gels, and foam core mostly for tabletop shooting. We’ve welded the same pin
as is found on a Dot or Finger to a Spring Clamp so that it can be mounted
into a Hollywood Superflex Arm, a Flex Arm or a Grip Head.
CATALOG # DESCRIPTION LBS LIST PRICE
B429500 AFFLAC Clamp — Black .25 $28.00
GAFFER GRIP
This multi-use clamp can put small light fixtures virtually anywhere that the
adjustable jaw can clamp over. The jaw is equipped with 12 rubber gripper
pads that not only protect the surface being clamped but also provide
greater gripping ability. Because the jaw opening is adjustable, the clamp
will grip to 3-3/4”.
CATALOG # DESCRIPTION LBS LIST PRICE
B429587 Gaffer Grip 1.25 $40.00
HEAVY DUTY FLAG CLAMP
Utilizing the same clamp as the Heavy Duty Side Arm, this device can be
attached to a light stand riser, an overhead grid or even the yoke of a large
light fixture. The arm extends 6”, rotates 360° and terminates in a 2-1/2”
Grip Head.
CATALOG # DESCRIPTION LBS LIST PRICE
429850 Flag Clamp — Heavy Duty 4 $157.00
70
B429500
AFFLAC CLAMP
B429587
GAFFER GRIP
429850
HEAVY DUTY FLAG CLAMP
AFFLAC CLAMP w/PAPER ROLL