click here to view & download the full - Matthews Studio Equipment

429680
JR. RECEIVER
429679
5/8” MALE
PIN ADAPTER
429676
3 FT.
(914mm) 429671
4 FT.
(1219mm)
429677
3’- 6’
(914mm -
1828mm)
429674
4’- 8’
(1219mm -
2438mm)
429672
6 FT.
(1828mm)
429675
5’-10’
(1524mm -
3048mm)
429673
8 FT.
(2438mm)
429612
STIRRUP HANGER
429691
2’- 6’
(609mm -
1828mm)
HEAVY-DUTY
HANGERS
TELESCOPING HANGERS
Telescoping Hangers have a very substantial pipe clamp to attach to a
lighting grid. The pipe clamp has been slightly offset, to allow the riser or
drop down tube to slide up when there is sufficient room between the grid
and the ceiling. It is therefore possible for a 3’ Single Extension Hanger to
go from a few inches below the grid to the fully extended 3 feet. Matthews
Telescoping Hangers are available in single stage and double stage. All
terminate in 1/2”-13 female thread to permit the attachment of several
hanging accessories listed below.
CATALOG # DESCRIPTION LBS LIST PRICE
429676 Telescoping Hanger Single 8 $186.00
Extension 3 Ft. (914mm)
429671 Telescoping Hanger Single 10 191.00
Extension 4 Ft. (1219mm)
429672 Telescoping Hanger Single 11.5 208.00
Extension 6 Ft. (1828mm)
429673 Telescoping Hanger Single 14 220.00
Extension 8 Ft. (2438mm)
429677 Telescoping Hanger Double 14 253.00
Extension 3 to 6 Ft. (914mm - 1828mm)
429674 Telescoping Hanger Double 15 281.00
Extension 4 to 8 Ft. (1219mm - 2438mm)
429675 Telescoping Hanger Double 15 298.00
Extension 5 to10 Ft. (1524mm - 3048mm)
429691 Telescoping Hanger Triple 16 236.00
Extension 2 to 6 Ft. (609mm - 1828mm)
429612 Telescoping Hanger Stirrup 1.75 28.00
429680 Telescoping Hanger Junior 1.5 63.00
Receiver Adapter
429679 Telescoping Hanger 5/8” Male .50 11.00
Pin Adapter
Matthews Hangers are engineered
with an internal mechanical stop which
will prohibit the Riser from falling
through should the lock-off knob be
inadvertently released. When properly
used, Matthews Hangers are the
safest in the business!
79
HARDWARE