Quick Application Guide (PDF 8630KB) - Graphtec Corporation

More documents

Recommendations

Info

1 Take out the unnecessary portions, and adhere the Transfer sheet from above. Cutting film Adhere Adhere Also take out the unnecessary portions left on inside the letters. 1 Use a tool such as the tweezers to take out the unnecessary portions. 2 Transcribe on the Transfer sheet. 1 Securely rub with a cloth from above the Transfer sheet to transcribe the cut letters on the Transfer sheet. 3 Paste on the point you prefer. 1 Paste the letters transcribed on the transfer sheet, where you prefer. Backing sheet of Cutting film Transfer sheet 2 Paste the Transfer sheet from above. 14 Transfer sheet 2 Carefully peel off the Backing sheet of Cutting film so that the cut letters can be pasted on the Transfer sheet. 2 Carefully peel off the Transfer sheet. Design Cut Adhere Start working to adhere the letters to the place you prefer. At first, take out the unnecessary portions from the Cutting sheet. Thereafter, adhere the Transfer sheet from the top. Transcribe the cut letters on the pasted Transfer sheet. Thin/ fine areas should be pressed firmly so that the letters can be securely adhered. Slowly peel off the Backing sheet little by little. If part of the letter is left on the Backing sheet of Cutting film during peeling, restore the Backing sheet to original point and rub it again. Firmly rub with a cloth to assure pasting. Once the Transfer sheet is peeled, it is completed.
Cutting to match the printed graphics or letters (Contour cutting - Only CC330-20) pCreate the Pop-up Card by use of the creating example stored in CD-ROM! 1 Start the ROBO Master, and open the Data (FILE). 2 Enter the letters and make the layout. * Only CC330-20 has this function. * This guide uses the screen and illustration that are displayed when the Craft ROBO CC330-20 is connected with the Windows Vista. Design Designing graphics and letters 1 Click (Text). 1 Start the ROBO Master, and click [Open]. 2 Click "New Baby pop-up greeting card (for practice)". 3 Click "Open". 2 Select a font. 3 Set each letter width and height to "5.0", respectively. 4 Remove tick from the check box of "Outline". 5 Enter the letters. 6 Click "OK". 7 Move it with Mouse, and click to define. 15 Design the Pop-up card. Print the Graphic or letters by the Printer. Cutting with Craft ROBO Assemble Use the sample data (New Baby pop-up greeting card (for practice)). R Sample data for design Sample data can be modified or edited to create a totally new design. Enter the letters and make layout on the optional point. R To edit the shape of letters The shapes of letters such as Font (Type- face) and Size can be edited in "Text Set- tings" screen. R To change the color of the letters Click while the letter is being selected to set the color in "Line Settings" screen.
Page 2 and 3: To Ensure Safe and Correct Use P To
Page 4 and 5: Introducing With the CC300-20, you
Page 6 and 7: Cutting out letters and shapes (CC3
Page 8 and 9: 3 Set the Output. 4 Specify the C
Page 10 and 11: 9 Set the attached Media on the car
Page 12 and 13: Making stickers from vinyl (Only CC
Page 16 and 17: 3 Insert the Image. Print 1 Set the
Page 18 and 19: Cut 1 Attach on the carrier sheet.
Page 20 and 21: Using the SD Card Insert the SD Car

Quick Application Guide (PDF 8630KB) - Graphtec Corporation

Create successful ePaper yourself

Delete template?

Save as template?