Leyden Cast Iron Down-Draft Wood Stove Burn Procedures - Lopi

ePAPER READ

DOWNLOAD ePAPER

lopistoves.com

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

There are many way to start a wood fire. Each wood stove has its own operating requirements, our

Leyden included. For the Lopi Leyden cast iron wood stove to burn correctly the unit needs to be heated

well for the combustor to operate properly. Here is step by step instructions on how we suggest you

light your fire:

The first step is to crumple 6 to 8 full pieces of newspaper and place them in the center of the firebox.

Next stack 10 to 20 pieces of kindling on top of the newspaper in a criss cross pattern to allow plenty

of air flow.

Revere Fireplace Insert Owner's Manual - Lopi

There are many way to start a wood fire. Each wood stove has its own operating requirements, our Leyden included. For the Lopi Leyden cast iron wood stove to burn correctly the unit needs to be heated well for the combustor to operate properly. Here is step by step instructions on how we suggest you light your fire: The first step is to crumple 6 to 8 full pieces of newspaper and place them in the center of the firebox. Next stack 10 to 20 pieces of kindling on top of the newspaper in a criss cross pattern to allow plenty of air flow.

Making sure the bypass and air control are both open, light the newspaper and partially close the doors leaving them cracked open about 1/4" inch for the first 2 to 3 minutes of warm up. Allow the kindling to burn for approximately 5 minutes then with the provided fire poker flatten the coal bed. Next you will want to load 10 to 15 pieces of medium size wood.

Page 1: Leyden Cast Iron Down-Draft Wood St
Page 5 and 6: Now that the unit is heated and has

Leyden Cast Iron Down-Draft Wood Stove Burn Procedures - Lopi

Create successful ePaper yourself

Delete template?

Save as template?