Leyden Cast Iron Down-Draft Wood Stove Burn Procedures - Lopi

ePAPER READ

DOWNLOAD ePAPER

lopistoves.com

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

The 10 to 15 pieces of medium size wood will fill the stove approximately 3/4 full. The reason for

using medium size pieces of wood is to acquire a coal bed as soon as possible. Let the stove burn with

the bypass and air control open for about 45 minutes.

After about 45 minutes your stove should have a 3 to 4 inch coal bed and be ready to load.

Revere Fireplace Insert Owner's Manual - Lopi

The 10 to 15 pieces of medium size wood will fill the stove approximately 3/4 full. The reason for using medium size pieces of wood is to acquire a coal bed as soon as possible. Let the stove burn with the bypass and air control open for about 45 minutes. After about 45 minutes your stove should have a 3 to 4 inch coal bed and be ready to load.

Now that the unit is heated and has a good coal bed, fill the unit with wood, close the bypass and adjust the air control to your desired burn rate. The Lopi Leyden cast iron wood stove has low burn times from 12 to 18 hours. Here are some pictures that will show you what to expect during a low burn: These pictures were taken at 4 hours into a low burn.

Page 1 and 2: Leyden Cast Iron Down-Draft Wood St
Page 3: Making sure the bypass and air cont

Leyden Cast Iron Down-Draft Wood Stove Burn Procedures - Lopi

Create successful ePaper yourself

Delete template?

Save as template?