2005-2006 steep-slope roofing materials guide - National Roofing ...

Underlayment Sheets
2005-2006 Steep-slope Roofing Materials Guide 234
1. COMPANY NAME CERTAINTEED DEWITT PRODUCTS DEWITT PRODUCTS
CORPORATION COMPANY COMPANY
2. PRODUCT NAME OR DESCRIPTION #30 ROOF SHIELD 67 LITE 'N SMOOTH
PLAIN FELT - UL ICE & WATER ICE & WATER
3. PRODUCT CATEGORY
A. Organic Asphalt-Saturated Felt, Unperforated X
B. Organic Asphalt-Saturated Felt, Coated
C. Aspahlt Fiberglass Felt
D. Special "Ice Shield" Underlayment X X
4A.
PRODUCT INFORMATION (FOR PRODUCTS IN CATEGORY 3A, 3B,
OR 3C)
Type (ASTM standard [specify] or generic)
Available as Sepcialty Underlayment (type, e.g., shake felt)
TYPE II (D 266)
Sheet Width (inches) 36
Size Per Roll (sq. ft.) 216
Weight Per Roll (pounds) 54
4B. PRODUCT INFORMATION (FOR PRODUCTS IN CATEGORY 3D)
Kind of Sheet(s) (e.g., felts, modified bitumen) MODIFIED BITUMEN MODIFIED BITUMEN
Number Of Ply(ies)/Sheets Comprising Underlayment 1 1
Waterproofing Medium (e.g., asphalt, modified asphalt) MODIFIED ASPHALT MODIFIED ASPHALT
Application Method (e.g., mechanical, mopped, self-adhered) SELF-ADHERED SELF-ADHERED
Sheet Width (inches) 36 36
Size Per Roll (sq. ft.) 200 200
Weight Per Roll (pounds) 76 LBS 57 LBS.
5. AVAILABILITY RESTRICTED REGIONALLY (yes/no) YES NO NO
6. RECOMMENDED FOR APPLICATION WITH:
Asphalt Shingles X X X
Fiber-Cement Roof Components X X
Clay Tile X
Concrete Tile X X
Metal Roof Components X
Slate X X
Wood Shakes/Shingles
Other (specify)
X
7. YEAR PRODUCT FIRST SOLD 1989 1996
8. NUMBER OF SQUARES INSTALLED
9. DISTRIBUTION
Distributors (number handling product or no) UNLIMITED UNLIMITED
Direct (number of regional service locations or no) 2 2
10. UL-CLASSIFIED PREPARED ROOFING ACCESSORY (yes/no)
COMPLIES WITH:
YES YES YES
11A. ASTM D 224–89 STANDARD SPECIFICATION FOR SMOOTH-
SURFACED ASPHALT ROLL ROOFING (ORGANIC FELT ) (type or NA)
Type I–Minimum net mass per unit area of roofing, 39.8lb/100 sq. ft
Type II–Minimum net mass per unit area of roofing, 54.6 lb/100 sq. ft
Type III–Minimum net mass per unit area of roofing, 51.1lb/100 sq. ft
Type IV–Minimum net mass per unit area of roofing, 39.8 lb/100 sq. ft.
11B. SATURATED ORGANIC FELT USED IN ROOFING &
WATERPROOFING ( type or NA)
Type I–Commonly called No. 15 asphalt felt
NA
Type II–Commonly called No. 30 asphalt felt
11C. ASTM D 2626–97 STANDARD SPECIFICATION FOR ASPHALT-
X
SATURATED AND COATED ORGANIC FELT BASE SHEET USED IN
ROOFING (yes, no or NA)
11D. ASTM D 4869–88 (1993) STANDARD SPECIFICATION FOR ASPHALT -
SATURATED ORGANIC FELT SHINGLE UNDERLAYMENT USED IN
ROOFING (type or NA)
Type I–Shingle Underlayment
Type II–Heavy Duty Shingle Underlayment
11E. ASTM D 1970–00 STANDARD SPECIFICATION FOR SELF-ADHERING
YES
POLYMER MODIFIED BITUMINOUS SHEET MATERIAL USED AS
STEEP ROOFING UNDERLAYMENT FOR ICE DAM PROTECTION (yes,
no, or NA)
NA YES YES
11F. OTHER ASTM SPECIFICATION (specify)
12. ACCEPTED BY THE FOLLOWING CODES ICBO,
MIAMI-DADE CNTY, FL
ICBO 4887 ICBO 4887
13. FOR SALES INFORMATION, CONTACT: LOCAL OFFICE 800/962-8599 800/962-8599
FOR TECHNICAL INFORMATION, CONTACT: 800/322-3060 800/962-8599 800/962-8599
14. SEE APPENDIX IF CHECKED
NA=not applicable
X