2005-2006 steep-slope roofing materials guide - National Roofing ...

Asphalt Shingles, Part 2 ― Technical Data
2005-2006 Steep-slope Roofing Materials Guide 50
1. COMPANY NAME ATLAS
ROOFING
CORPORATION
2. PRODUCT NAME PINNACLE 45
3. PRODUCT DESCRIPTION
Reinforcing (organic/fiberglass/polyglass) FIBERGLASS
4. COMPLIES WITH:
4A.
Type I -- Uniform or nonuniform thickness shingles of any style
Type III -- Uniform or nonuniform thickness shingles of any style
4B.
Type I -- Self-sealing
Type II -- Non-self-sealing
X
4C.
YES
5A. MASSES OF ASPHALT SHINGLES: ORGANIC SHINGLES
Average net mass per unit area, min, lb/100 ft 2
Type I: 95.0; Type II: 95.0; Type III: 89.7
Net mass of weather-exposed portion (ea. bundle) min, lb/100 ft 2
Type I: 91.0; Type II: 110.0; Type III: 85.7
Net mass of upper portion (ea. bundle), min, lb/100 ft 2
Type I: NA; Type II: 72.0; Type III: NA
Mass of desaturated, moisture-free felt, min, lb/100 ft 2
Type I: 11.0; Type II: 11.0; Type III: 9.0
Mass of asphalt saturant based on the mass of the dry felt, min % 165
Mass of weather-side coating on the weather-exposed portion, min, lb/100 f 2
Type I: 23.0; Type II: 30.0; Type III: 23.0
Mass of weather-side coating on the upper portion, min lb/100ft 2
Type I: 23.0; Type II: 15.0; Type III: 23.0
Mass of reverse-side coating, min, lb/100 ft 2
ASTM D 225-03 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced with Mineral Granules (indicate type
or NA)
ASTM D 3018-03 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules (indicate type or NA)
ASTM D 3462-03 Standard Specification for Asphalt Shingles Made form Glass Felt and Surfaced with Mineral Granules
(YES/NO/NA)
3.0
Ash of the desaturated felt, max % Type I: NA; Type II: 10.0; Type III: 10
Mass of weather-side mineral matter passing a No. 6 sieve and retained on a No. 70 sieve, min,
lb/100 ft 2 18.5
Mass of weather-side mineral matter retained on a No. 20 sieve, based on the mass passing a
No. 6 sieve and retained on a No. 70 sieve, min, % 55.0
Mass of weather-side mineral matter passing a No. 40 sieve, based on the mass of passing a No.
6 sieve, and retained on a No. 70 sieve, max %
Mass of weather-side mineral matter passing a No. 70 sieve, based on the mass of the weather-
5.0
side coating asphalt and the mineral matter passing the No. 70 sieve, max %
Mass of total mineral matter including surfacing and stabilizer on both sides, based on the net
60.0
mass of the finished product, min % Type I: NA; Type II: 35.0; Type III: NA
5B. MASSES OF ASPHALT SHINGLES: FIBERGLASS SHINGLES
Minimum net mass per area of shingles (individual bundle), lb/100 ft 2 , min. 70.0 70
Average net mass per area of shingles (total sample), lb/100 ft 2 , min. 73.0 73
Mass per area of mat, lb/100 ft 2 , min. 1.35 1.35
Mass per area of asphalt, lb/100 ft 2 , min.
Mass per area of mineral matter passing a No. 6 sieve and retained on a No. 70 sieve, lb/100 ft
15.0 15
2 ,
min
Mass percent of mineral matter passing a No. 70 sieve based on the total asphalt and mineral
25.0 25
matter passing the No. 70 sieve, max. 70.0 70
6. PHYSICAL REQUIREMENTS: FIBERGLASS SHINGLES
Behavior on heating
Loss of volatile matter, % max. 1.5 1.5
Sliding of granular surfacing, in. min. 1/16 1/16
Tear strength, g min. 1700 1700
Fastener pull-through resistance at 73 ±4 F, lbf, min 20 20
Fastener pull-through resistance at 32 ±4 F, lbf, min 23 23
Penetration of asphalt, 0.1mm (tested w/o mineral stabilizer) min. 15 15
Asphalt softening point, F (tested w/o mineral stabilizer) min/max 190 min.; 235 max. 230
Weight of displaced granules, max. 1.0 g 1.0
7. FIRE/WIND/IMPACT RESISTANCE
Fire resistance, UL 790 or ASTM E 108 (Class A, B, or C)
Wind resistance, UL 997 or ASTM D3161 (Class A, D or F)
Wind resistance, UL 2390 and ASTM D6381 (Class D, F, G or H)
CLASS A
Wind resistance (max. wind speed allowable) 70
Impact resistance, UL 2218 (Class 1, 2, 3, or 4) N/A
8. CODE ACCEPTANCE
BOCA Evaluation Service, Inc. (report number)
ICBO Evaluation Service, Inc. (report number)
ICC Evaluation Service, Inc. (report number)
SBCCI Public Safety Testing & Evaluation Service, Inc. (report number)
National Evaluation Service, Inc. (report number)
Other agencies (agency & report identification number)
9. SEE APPENDIX IF CHECKED