Compressor Handbook - Embraco
Compressor Handbook - Embraco
Compressor Handbook - Embraco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6.4.3.9 Leak control<br />
COMPRESSORS<br />
HANDBOOK<br />
Chapter<br />
INFORMATION ABOUT CORRECT COMPRESSOR INSTALLATION<br />
<br />
<br />
DIN8964 <br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Note: Do not make a mixture of R404A and air to control leaks in the system.<br />
6.4.3.10 High pressure limit control<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
(1) The soluble residual contents and solid residues must be less than 100mg/m 2 of system internal surface area. Of this,<br />
a maximum of 40 mg/m 2 can be soluble and the maximum of 60mg /m 2 can be insoluble (for the definitions of solid/<br />
soluble and additional details refer to the norm mentioned above).<br />
Doc. Code Emission Revision Date Page