Renold Couplings Cat 7th-4 - Industrial and Bearing Supplies
Renold Couplings Cat 7th-4 - Industrial and Bearing Supplies
Renold Couplings Cat 7th-4 - Industrial and Bearing Supplies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
C1<br />
C2<br />
F<br />
Gearflex GFV<br />
Ordering Code GF V 25 DA<br />
Gearflex<br />
Vertical Series<br />
Size<br />
B1<br />
A1<br />
A2<br />
B2<br />
D<br />
Coupling Power Torque Speed Bore A1 Bore A2 Dimensions Offset<br />
Size /100rpm Nominal Max** Max* Min Max Min B1 B2 C1 C2 D F L Mass WR 2 Max<br />
Kw Nm rpm mm mm mm mm mm mm mm mm mm mm mm kg kg m 2 mm<br />
GFV15DA 14.9 1423 7100 46 14 75 20 60 98 49 47 152 8 104 9 0.019 0.8<br />
GFV20DA 28.2 2693 5400 57 20 95 27 76 124 62 60 178 8 130 17.5 0.044 1.0<br />
GFV25DA 48 4584 4800 78 27 110 27 102 148 77 75 213 9 161 30 0.107 1.2<br />
GFV30DA 77.6 7411 4250 90 27 130 39 117 173 91 89 240 10 190 40 0.200 1.4<br />
GFV35DA 128 12224 4000 110 39 155 39 143 201 106 104 279 12 222 64 0.446 1.7<br />
GFV40DA 196 18718 3600 127 39 180 55 165 233 121 116 318 13 250 94 0.842 2.0<br />
GFV45DA 312 29796 3290 145 55 200 55 191 262 135 130 346 17 282 128 1.350 2.3<br />
GFV50DA 431 41161 2920 165 55 225 55 216 294 153 148 389 17 318 187 2.800 2.6<br />
GFV55DA 578 55199 2630 185 55 250 55 241 324 175 164 425 17 356 245 3.940 3.0<br />
GFV60DA 857 81844 2320 205 55 265 55 267 349 188 182 457 20 390 300 5.130 3.4<br />
GFV70DA 1096 104668 2120 225 55 310 55 292 406 221 221 527 23 465 475 11.040 3.9<br />
For more information telephone us on +44 (0) 29 20792737 or fax +44 (0) 29 20791360 E-Mail: cardiff.sales@renold.com<br />
45<br />
Double Engagement<br />
* Maximum Bore - The maximum bores shown are absolute maximums. Under normal circumstances the boss to bore ratio should not be less<br />
than 1.5 for st<strong>and</strong>ard applications. Consult <strong>Renold</strong> for overbore approval.<br />
** Speed in excess of these shown may require additional balancing.<br />
L