Renold Couplings Cat 7th-4 - Industrial and Bearing Supplies

kW
1000
800
600
400
200
100
80
60
40
20
10
8
6
4
2
1.0
0.8
0.6
0.4
0.2
Larger coupling sizes are available up to 2000kW at 1400 R.P.M.
This chart may be used for the selection of coupling size. If your
selection falls on a dividing line, always select the next largest size
and use reduced oil fill.
Hydrastart couplings can be used for up to five equi-spaced starts
per hour.
Applications requiring more than five starts an hour should always
be referred to Renold.
Hydrastart Selection Chart
725 960 1440
500 600 700 800 900 1000 1200 1400 1600 1800 2000 2400 2800 3200 3500
Rotating equipment must be provided
with a suitable guard before operating or
injury may result.
t/mn
For more information telephone us on +44 (0) 29 20792737 or fax +44 (0) 29 20791360 E-Mail: cardiff.sales@renold.com
53
1750 2950 3600
HS13
HS12
HS11
HS10
NOTE: Hydraulic couplings will not compensate for an under-sized
electric motor.
HS8
HS6
HS4
HS2
It is the responsibility of the system
designer to ensure that the application of
the coupling does not endanger the other
constituent components in the system.
Service factors given are an initial
selection guide.