SPM 05 ENvFIN.indd - Salomon Certification

A SD F G H J K
Legend
1 Handle with
Self-Centering Clamps
2 Toe Guide
3 Tip-of-Boot Sole
Indicator
4 Locking Lever
5 Mid-Sole Indicator
6 Boot Size Indicator
7 Drill Bit Bushing
8 Self-Centering Guide
for Heel of Boot
Jig Use: 10 Steps
Ref. Jig Application
Jig Selection Chart*
78313301 Adult line Extralight S710 SC, S712 SC - 710 e2 , 712 e2 (Small, Medium, Large)
000927 Junior line Ski width 56 mm to 80 mm / C305 - C305 Mini
784061 Junior fat skis Ski width 56 mm to 99 mm / C305 - C305 Mini
001003 Rental line Synchro Center - Synchro Rental
887623
887762
Universal plates Poweraxe Race SL / Poweraxe Race GS
001157 Adult fat skis Ski width > 80 mm / Poweraxe - Spheric - Driver - Quadrax
001040 Adult fat ski Rental Ski width > 80 mm / Adult Synchro Center - Adult Synchro Rental
A jig ensures that all holes for binding mounting are drilled in the correct location.
The bushings guide the drill bit so that it remains perpendicular to the ski.
A S Correct Incorrect
1. Select the proper jig
for the binding model
to be mounted by
referencing the Jig
Reference Guide.
2. Check the skis’ serial
number to ensure you
are mounting a matched
pair. Place the skis on the
workbench with the ski
tips pointed to your left.
3. Open the jig by twisting
both handles inward.
Place the jig on the ski.
4. Open the locking lever.
5. Extend the jig to accept
the boot.
001156
Adult line
6. Place the toe of the
boot sole against the toe
guide. Twist the rear
handle to open the rear
clamps and slide the heel
guide snugly against the
boot heel. Fig A
7. Close the locking lever.
(Compare the mid-sole
mark on the boot with
the mid-sole indicator
on the jig. If the mid-sole
mark on the boot and
the mid-sole indicator
on the jig do not agree,
use the mid-sole mark on
the boot. This requires
leaving the boot in the jig
to position it on the ski.)
JIG SELECTION & USE
8. Position the jig on the
ski. Fig S
a. If the ski has a mid-sole
mark, align the mid-sole
mark on the boot with
the mid-sole mark on
the ski.
b. If the ski has a tip-ofboot
mark, align the
tip-of-boot sole indicator
on the jig with the tip-ofboot
mark on the ski.
c. If the ski has no
visible markings for jig
location, consult the ski
manufacturer for proper
mounting position.
RETAIL SYSTEMS
Senior S912 Ti Pe 2 - S912 Ti - S914 Pe 2 - S914 Axe+ - S912 Pe 2 - S912 Ps
- S914 FIS - S810 - S810 CP - S811 Ps - S810 Ps - S810 Ti Axe+ - S711 Ps -
S710 CP - S710 - S710 Pa - C610 CP - C610 - C509 Drive+ - C509
Junior S910 T Ps - S910 T - C608 CP - C608 - C607
9. Once the jig is in
position, release the
handles simultaneously
and the jig will center
itself on the ski.
10. Re-check your work.
The ski is now ready to
be drilled. (Customers
may request that specific
mounting instructions be
followed. This is particularly
true for skiers who
want to initiate turns
more easily. Make a note
on the Workshop Form
of any of these special
instructions.)
> Reference
4-Hole Toe
Spheric Oversize
3-Hole Toe
Spheric Sport & Quadrax
Poweraxe
SC System Demo /
Cosmic
SR System Rental
& Demo / Cosmic
* Contact your customer service
representative for additional jigs.
9
13
14
15
36
40