SPM 05 ENvFIN.indd - Salomon Certification

14
13
12
11
Mounting (continued)
G H
The final step is to measure
all boots in inventory with
the Salomon Boot Sole
Measuring Device (Ref.
#001189) Fig G and affix
J K
2004 – 2005 Synchro
Center Systems use colorcoded
adjustment range
indicators.
Simply read the boot sole
length in mm’s (stamped on
the side of the boot sole)
and move the toe to the
10
9
K
S912 Light
the appropriate Synchro
Sizing Sticker to each boot
(excluding short mounted
Spheric Propulse models)
Fig H.
corresponding mm length
range position Fig J. Each
range is individually color
coded.
Then move the heel to the
correct color coded mm
length mark shown on the
heel track cover Fig K.
SC SYSTEM DEMO / COSMIC
Legend
1 Heel Track
2 Adjustment Loop
3 Adjustment Screw
4 Visual Indicator
5 Heel Lever
6 Heel Cup
7 Brake Pedal
8 Adjustment Range Indicators
9 Spheric Pedal/AFD
Color coding makes it easier
to read. For example: when
the toe is positioned in the
yellow (296 – 307 mm)
range, look for the matching
yellow rectangles (296 mm,
304 mm, 307 mm) on the
heel track cover.
RENTAL & DEMO MOUNTING
J H
G
15
* Use Salomon grease (Ref. #000905) on track.
K
10 Toe Cup
11 Toe Height Adjustment Screw
12 Visual Indicator
13 Adjustment Screw
14 Toe Length Adjustment Lever
15 Brake Arm
16 Heel Housing
Lubrication Point*
(continued)
F D
16
A
S
> Additional Reference
# 001189
Pilot System
Mounting & Adjustment
Salomon Boot Sole
Release Measuring Value Selection Device
& Adjustment
Pre-Season
Inspections
* Synchro Presets.
Micrometric toe heights, independent
and simultaneous wing adjustments can
be preset using a standard norm boot
sole (page 8) for Synchro applications.
A dab of silicone caulk can then be put
into the slot of the adjustment screws to
prevent tampering.
37
21
24
43