Samsung iPOLiS SRN-3250 User Manual - Use-IP

More documents

Recommendations

Info

Chapter 2. Part Names 2.1. Front Panel No. Name Function 1 Key Lock Turning the key completely engages the lock, so the buttons on the front panel cannot be accessed and the HDD bay door cannot be opened. 2 SATA-Bracket Mounts hard disks for storing recorded video. Up to four hard disks can be mounted. Mounted HDDs are referred to as Internal HDD1 (upper left), Internal HDD2 (upper right), Internal HDD3 (lower left), and Internal HDD4 (lower right.) 3 Internal HDD1 A blue indicator means that Internal HDD1 is installed and functioning normally. A red indicator means that Internal HDD1 is not functioning properly. 4 Internal HDD2 A blue indicator means that Internal HDD2 is installed and functioning normally. A red indicator means that Internal HDD2 is not functioning properly. 5 Internal HDD3 A blue indicator means that Internal HDD3 is installed and functioning normally. A red indicator means that Internal HDD3 is not functioning properly. 6 Internal HDD4 A blue indicator means that Internal HDD4 is installed and functioning normally. A red indicator means that Internal HDD4 is not functioning properly. 7 EXTERNAL HDD1 8 EXTERNAL HDD2 9 EXTERNAL HDD3 A blue indicator means that an external HDD is connected to the rear eSATA Port1 and functioning normally. A red indicator means that External HDD1 is not functioning properly. A blue indicator means that an external HDD is connected to the rear eSATA Port2 and functioning normally. A red indicator means that External HDD2 is not functioning properly. A blue indicator means that an external HDD is connected to the rear eSATA Port3 and functioning normally. A red indicator means that External HDD3 is not functioning properly. 10
No. Name Function 10 EXTERNAL HDD4 A blue indicator means that an external HDD is connected to the rear eSATA Port4 and functioning normally. A red indicator means that External HDD4 is not functioning properly. 11 REC A red indicator means that the product is in recording mode. 12 ALARM A blue indicator means that an event in Input Group has occurred. 13 ERROR A red indicator means that the product is not functioning properly. 14 RAID A blue indicator means that the product is running in RAID mode. 15 LINK/ACT1 A blinking blue indicator means that a network cable is properly connected to the Monitor Ethernet Port, and data communication is taking place properly. 16 LINK/ACT2 A blinking blue indicator means that a network cable is properly connected to the Source Ethernet Port, and data communication is taking place properly. 17 LINK/ACT3 A blinking blue indicator means that a network cable is properly connected to the Storage Ethernet Port, and data communication is taking place properly. 18 POWER A red indicator means that the product is powered on. 19 Config Ethernet Port <strong>Use</strong>d to connect the product to a computer for the system configuration. 20 LCD Panel The panel displays the current status of the product; it can also be used to change the system configuration with the adjacent buttons. 21 ESC Button This button is used to change the system configuration. 'Chapter 5 LCD Setup' covers its use in detail. 22 Direction Button Enter Button This button is used to change the system configuration. 'Chapter 5 LCD Setup' covers its use in detail. 11
Page 1 and 2: 32 CHANNEL 64 CHANNEL NVR User Manu
Page 3 and 4: Preface Thank you for choosing a Sa
Page 5 and 6: Table of Contents Preface .........
Page 7 and 8: 5.2. Network Setup ................
Page 9 and 10: To prevent electrical fire, do not
Page 11: 1.2. Product Contents The contents
Page 15 and 16: 2.3. Default Settings The following
Page 17 and 18: Camera Setup Channel List Channel S
Page 19 and 20: Time Setup Main Menu Sub Menu Defau
Page 21 and 22: . 3.1.3. Internal HDD Open the HDD
Page 23 and 24: ⑥ Make sure that the SATA Bracket
Page 25 and 26: Note 3.1.5. Sensor You may connect
Page 27 and 28: RELAY OUT 2 NC CM NO Normal Close O
Page 29 and 30: dialog. (If the "Obtain an IP addre
Page 31 and 32: When connecting to the product for
Page 33 and 34: Chapter 4. Operation 4.1. System Re
Page 35 and 36: 4.4. Monitoring If you are logging
Page 37 and 38: You can adjust the PTZ speed with t
Page 39 and 40: 4.5. Playback Click at the top of t
Page 41 and 42: 4.5.2. Event Search displays the Ev
Page 43 and 44: Note The maximum searchable period
Page 45 and 46: 4.6.1. Status Displays the current
Page 47 and 48: events occurring in the selected ch
Page 49 and 50: For Output Group, Output Source Dur
Page 51 and 52: Video Quality, Video Resolution, Vi
Page 53 and 54: automatically searches the current
Page 55 and 56: Set Repeat Recording to On, and the
Page 57 and 58: While building a RAID mode, appears
Page 59 and 60: Note Caution product automatically
Page 61 and 62: The Source Ethernet Port connects t
Page 63 and 64:
Note To connect your computer to th
Page 65 and 66:
4.6.7. Time Setup This page deals w
Page 67 and 68:
4.7. System The following page appe
Page 69 and 70:
Selecting a firmware file activates
Page 71 and 72:
Note Up to 10,000 logs each for Sys
Page 73 and 74:
4.7.3. User Setup On this page, you
Page 75 and 76:
To back up specific event video fil
Page 77 and 78:
Button Name Function 1 Select Folde
Page 79 and 80:
5.1. System On the default LCD scre
Page 81 and 82:
When pressing Enter, the following
Page 83 and 84:
Internal HDD [1] is empty!! RAID PA
Page 85 and 86:
Press the ∧, ∨ buttons to selec
Page 87 and 88:
Password a Repeat the steps to ente
Page 89 and 90:
5.3. HDD Mode Setup On the main scr
Page 91 and 92:
Caution Selecting RAID5 configures
Page 93 and 94:
5.5. Formatting HDDs On the main sc
Page 95 and 96:
1. Select 1. Individual HDD, and th
Page 97 and 98:
Troubleshooting 1. Cannot boot. Ch
Page 99 and 100:
Product Specifications DISPLAY SRN-
Page 101 and 102:
Product Dimensions 99
Page 103 and 104:
For example, if you distribute copi
Page 105 and 106:
c) Accompany it with the informatio
Page 107 and 108:
EXCEPT WHEN OTHERWISE STATED IN WRI
Page 109 and 110:
To protect your rights, we need to
Page 111 and 112:
The Corresponding Source for a work
Page 113 and 114:
Corresponding Source may be on a di
Page 115 and 116:
of that license document, provided
Page 117 and 118:
A patent license is “discriminato
Page 119 and 120:
Preamble The licenses for most soft
Page 121 and 122:
any associated interface definition
Page 123 and 124:
Otherwise, if the work is a derivat
Page 125 and 126:
It is not the purpose of this secti
Page 127 and 128:
signature of Ty Coon, 1 April 1990
Page 129 and 130:
Correct Disposal of This Product (W
show all

Samsung iPOLiS SRN-3250 User Manual - Use-IP

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?