conveyor belts for - MEYER Industrie-Electronic GmbH

More documents

Recommendations

Info

06.417/0498 (Subject to alteration) Meyer Industrie-Electronic GmbH Carl-Bosch-Str. 8, D - 49525 Lengerich Tel.: +49-5481-9385-0, Fax: +49-5481-9385-12 E-Mail: sales@meyle.de Internet: http://www.meyle.de Address
Material flow control switch Type MFG M / J Application Material flow control switches are provided to be safely installed for the automatical operation of conveying plants. They control the charge height of the conveying belt as well as the interruption of the material flow. MEYLE material flow control switches MFG are equipped with a dragging sheet leaded over the belt by a joint pipe measuring around 50 cm long. This dragging sheet lies on the conveying belt or on the bulk material due its dead weight. During the transport of bulk material on the belt, the dragging sheet is highly different Techcal Data Technical Data displaced. After having achieved the displacement height being internally adjusted, the change-over effects. For a reliable, maintenance-free operation, all shafts are ball beared. The solid steel housing with the type of enclosure IP65 enables a high operating field. The dragging sheet is fastened with only one nut and, consequently, easy to be exchanged. It is mountable either for left or right direction of belt motion. Should the dragging sheet be too heavy for your special operation, a version with an adjustable counter weight is available. According to your specification, the material flow control switch is equipped either with a proximity switch or with a micro switch. Both should be in accordance with the following selection table. The micro switches have the advantage to a direct high switching capacity and the proximity switches are distinguished by free wear and a practically free hysteresis step back.
Page 1 and 2: Catalogue Safety equipments for con
Page 3 and 4: Rotation Rotation Speed Speed Speed
Page 5 and 6: Testing Testing and and Qualificati
Page 7 and 8: Conveyor belt speed monitor Type BW
Page 9: Mounting indstructions for belt spe
Page 13 and 14: Installation and operating instruct
Page 15 and 16: Pull Rope Emergency Switch Type NSR
Page 17 and 18: Technical Technical Data Data Data
Page 19 and 20: Pull-rope Emergency Switch SN VDE-a
Page 21 and 22: Technical Data: Certification VDE 0
Page 23 and 24: Pull-rope emergency switch with - p
Page 25 and 26: Selection table Type Contacts NO NC
Page 27: Signal Combination Type SK with pul
Page 31 and 32: Alarm signal post Type SM With pull
Page 33 and 34: Pull Rope Arrangement, Version A Pu
Page 39 and 40: Pull-rope Emergency Switch Type SNA
Page 41 and 42: Off-Track Off-Track Belt Belt Switc
Page 43 and 44: Technical Technical Technical Data
Page 45 and 46: Off-Track Belt Switches Typ FSR und
Page 48 and 49: 06.424/0698 (Subject to alteration)
Page 50 and 51: Arrangement of the off-track belt s
Page 52 and 53: 06.424/0698 (Subject to alteration)
Page 54 and 55: Variations • Pull-off release lev
Page 56 and 57: Technical Technical Data Data Desig
Page 58 and 59: With type EGN and EGN.M,two threade
Page 60 and 61:
Technical Data of Standard Unlockin
Page 62:
06.424/0698 (Subject to alteration)
Page 67:
Optical & acustic Signal Devices
Page 70 and 71:
Double Flash Beacon Type 837 High i
Page 72 and 73:
Warning Beacons Type 850/851/852 Av
Page 74 and 75:
Roating Mirror Beacon Type 881 Low-
Page 76 and 77:
06.424/0698 (Subject to alteration)
Page 78 and 79:
Signal Horn Type 482 Very loud smal
Page 80 and 81:
Signal Horn Type 570 Very loud larg
Page 82 and 83:
Signal Horn Type 572 Particularly l
Page 84 and 85:
EEx-Alarm Bell Type 790 Particularl
Page 86:
MEYER INDUSTRIE-ELECTRONIC GmbH - M
show all

conveyor belts for - MEYER Industrie-Electronic GmbH

Create successful ePaper yourself

Delete template?

Save as template?