conveyor belts for - MEYER Industrie-Electronic GmbH

More documents

Recommendations

Info

06.424/0698 (Subject to alteration) Meyer Industrie-Electronic GmbH Carl-Bosch-Straße 8 49525 Lengerich Tel. (+ 49 54 81) 93 85 - 0 Fax (+ 49 54 81) 93 85 - 12 EMail: sales@meyle.de Address
Alarm signal post Type SM With pull-rope emergency switch, horn and flashing light Application The trade co-operative associations of today demand sharper measures for prevention of accidents, which are also used as guidelines by the technical supervisory bodies. One such safety measures is the installation of pull-rope emergency switches. They have proved themselves an effective means of acci- dent prevention on innumerable conveyor belt systems, in iron and steel works, in the quarrying and earth moving industries, in trans - shipment facilities, the chemical industry and open pit mining. For extended conveyor systems Techcal Data Technical Data In particular, such pull-rope emergency switches can be supplied as alarm signal post type SM. This alarm signal post is installed on the approach side of conveyor belt systems or machines and - apposed to the Emergency-OFF push buttons located at certain intervals - it can be operated at any point along the length of a section and, depending on the system, can disconnect single or multiple drives or even the total plant as a whole. The actuated switch is identifiable by way of the visual and audible signals. Design The alarm signal post type SM consist of • pull-rope emergency switch • flashing light • horn • terminal box Use of part of the equipment (i.e. only horn or only flashing light) is possible. Flashing lights and horns are also available for different voltages. The terminal box is of ample size to enable other local devices to be connected to the terminals. The connection leads enter the terminal box from below.
Page 1 and 2: Catalogue Safety equipments for con
Page 3 and 4: Rotation Rotation Speed Speed Speed
Page 5 and 6: Testing Testing and and Qualificati
Page 7 and 8: Conveyor belt speed monitor Type BW
Page 9 and 10: Mounting indstructions for belt spe
Page 11 and 12: Material flow control switch Type M
Page 13 and 14: Installation and operating instruct
Page 15 and 16: Pull Rope Emergency Switch Type NSR
Page 17 and 18: Technical Technical Data Data Data
Page 19 and 20: Pull-rope Emergency Switch SN VDE-a
Page 21 and 22: Technical Data: Certification VDE 0
Page 23 and 24: Pull-rope emergency switch with - p
Page 25 and 26: Selection table Type Contacts NO NC
Page 27: Signal Combination Type SK with pul
Page 33 and 34: Pull Rope Arrangement, Version A Pu
Page 39 and 40: Pull-rope Emergency Switch Type SNA
Page 41 and 42: Off-Track Off-Track Belt Belt Switc
Page 43 and 44: Technical Technical Technical Data
Page 45 and 46: Off-Track Belt Switches Typ FSR und
Page 48 and 49: 06.424/0698 (Subject to alteration)
Page 50 and 51: Arrangement of the off-track belt s
Page 54 and 55: Variations • Pull-off release lev
Page 56 and 57: Technical Technical Data Data Desig
Page 58 and 59: With type EGN and EGN.M,two threade
Page 60 and 61: Technical Data of Standard Unlockin
Page 62: 06.424/0698 (Subject to alteration)
Page 67: Optical & acustic Signal Devices
Page 70 and 71: Double Flash Beacon Type 837 High i
Page 72 and 73: Warning Beacons Type 850/851/852 Av
Page 74 and 75: Roating Mirror Beacon Type 881 Low-
Page 78 and 79:
Signal Horn Type 482 Very loud smal
Page 80 and 81:
Signal Horn Type 570 Very loud larg
Page 82 and 83:
Signal Horn Type 572 Particularly l
Page 84 and 85:
EEx-Alarm Bell Type 790 Particularl
Page 86:
MEYER INDUSTRIE-ELECTRONIC GmbH - M
show all

conveyor belts for - MEYER Industrie-Electronic GmbH

Create successful ePaper yourself

Delete template?

Save as template?