INCREMENTAL ENCODER MyInc - MEYER Industrie-Electronic ...
INCREMENTAL ENCODER MyInc - MEYER Industrie-Electronic ...
INCREMENTAL ENCODER MyInc - MEYER Industrie-Electronic ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
14<br />
GENERAL/OVERVIEW<br />
General<br />
Sine wave outputs: The sine wave signals are available as voltage<br />
signals. They can be further processed<br />
and can be multiplied by a factor of usually<br />
10, 20, 50, 100, 400, 500, 1000 res. binary<br />
factors (512, 1024). Due to the interpolation<br />
of the two signals, which are 90° out of<br />
phase, a very high resolution can be achieved.<br />
This makes these kind of signals specially<br />
useful for applications where very high<br />
resolutions are required. Further they are<br />
very suitable for digital drives with a very<br />
slow and precise movement, e.g. for grinding<br />
machines or lifts and elevators.<br />
Output circuit and recommended<br />
input circuit for sine wave voltage<br />
signals:<br />
R a = 10 Ω Z = 120 Ω<br />
C 1 = 150 pF U 1 = U 0<br />
C 2 = 10 pF<br />
R 1 = 10 kΩ<br />
R 2 = 33 kΩ<br />
U 0 = 2,5 V ±0,5 V OPV: z.B. MC33074<br />
Cable length: Depending on the output circuit and the electrical noise the following cable lengths are recommended:<br />
Output circuit max. cable length Encoder connected<br />
to e.g.<br />
Push-pull without inverted<br />
signals 100 m counter/PLC<br />
Push-pull with inverted signals 250 m PLC/IPC 1 )<br />
RS 422 with inverted signals up to 1000 m PLC/IPC 1 )<br />
(> 50 m depending<br />
on frequency)<br />
Voltage sinus with inverted<br />
signals 50 m PLC/IPC 1 )<br />
1)IPC = industrial PC<br />
Annotations:<br />
Depending on the application the recommended cable length can be shorter, especially in<br />
areas with strong electrical noise.<br />
Always use shielded cables<br />
The core diameter of the signal cores should be ∅ 0,14 mm 2<br />
The core diameter of the voltage supply cores should be large enough depending on the<br />
cable length, that the voltage supply of the encoder is high enough and the signals do not<br />
go below the minimum levels!<br />
We strictly recommend the use of the cable types written down in the accessories.<br />
Meyer <strong>Industrie</strong>-<strong>Electronic</strong> GmbH – MEYLE<br />
Carl-Bosch-Straße 8<br />
49525 Lengerich/Germany<br />
Tel.: +49 54 81-93 85-0<br />
Fax: +49 54 81-93 85-12<br />
Shaft turning clockwise, top view of shaft<br />
0-pulse is generated once per turn<br />
encoder recommended<br />
input circuit<br />
Internet: www.meyle.de<br />
E-Mail: sales@meyle.de<br />
1 V /<br />
1 V /<br />
1 V /