Print MSDS - Miller Electric Company Publications

More documents

Recommendations

Info

Inhalation/Suitable Respirator: DOW CORNING CORPORATION Material Safety Data Sheet DOW CORNING 997(R) VARNISH Page: 5 of 11 Version: 3.3 Revision Date: 2009/01/27 Respiratory protection recommended. Follow OSHA Respirator Regulations (29 CFR 1910.134) and use NIOSH/MHSA approved respirators. Protection provided by air purifying respirators against exposure to any hazardous chemical is limited. Use a positive pressure air supplied respirator if there is any potential for uncontrolled release, exposure levels are unknown, or any other circumstance where air purifying respirators may not provide adequate protection. Precautionary Measures: Avoid eye exposure. Avoid skin contact. Avoid breathing vapor, mist, dust, or fumes. Keep container closed. Do not take internally. Use reasonable care. Comments: Traces of benzene (carcinogen) may form if heated in air above 300 F (149 C). Provide ventilation to control vapor exposure within inhalation guidelines when handling at elevated temperatures. Review the OSHA benzene regulation for detailed information on safe handling requirements. When heated to temperatures above 150 C (300 F) in the presence of air, product can form formaldehyde vapors. Formaldehyde is a potential cancer hazard and a known skin and respiratory sensitizer. Vapors irritate eyes, nose, and throat. Safe handling conditions may be maintained by keeping vapor conditions within the OSHA permissible exposure limit for formaldehyde. Note: These precautions are for room temperature handling. Use at elevated temperature or aerosol/spray applications may require added precautions. For further information regarding aerosol inhalation toxicity, please refer to the guidance document regarding the use of silicone-based materials in aerosol applications that has been developed by the silicone industry (www.SEHSC.com) or contact the Dow Corning customer service group. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical Form: Liquid Color: Brown Odor: Solvent odor. Specific Gravity @ 25°C: 1.002 Viscosity: 105 cSt Freezing/Melting Point: Not determined. Boiling Point: > 130 °C Vapor Pressure @ 25°C: Not determined. Vapor Density: Not determined. Solubility in Water: Not determined. pH: Not determined. Volatile Content: Not determined. Flash Point: 77 °F / 25 °C (Pensky-Martens Closed Cup) Autoignition Temperature: Not determined. Flammability Limits in Air: Not determined. Note: The above information is not intended for use in preparing product specifications. Contact Dow Corning before writing specifications.
10. STABILITY AND REACTIVITY Chemical Stability: Stable. DOW CORNING CORPORATION Material Safety Data Sheet DOW CORNING 997(R) VARNISH Hazardous Polymerization: Hazardous polymerization will not occur. Conditions to Avoid: None. Materials to Avoid: Oxidizing material can cause a reaction. Hazardous Decomposition Products Page: 6 of 11 Version: 3.3 Revision Date: 2009/01/27 Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Metal oxides. Silicon dioxide. Formaldehyde. 11. TOXICOLOGICAL INFORMATION Special Hazard Information on Components Carcinogens CAS Number Wt % Component Name 100-41-4 10.0 - 30.0 Ethylbenzene IARC Group 2B - Possibly Carcinogenic to Humans. 91-20-3
Page 1 and 2:
Miller Electric Company MSDS 18JUN2
Page 3 and 4:
Product Identity: DUAL SHIELD MILD
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
PRO-CHEM, INC. 1475 BLUEGRASS LAKES
Page 13 and 14:
PRO CHEM, INC. 1475 BLUEGRASS LAKES
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
KESTER SOLDER Page: 2 of 6 MSDS Num
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
MATERIAL SAFETY DATA SHEET 02458 Pg
Page 27 and 28:
MATERIAL SAFETY DATA SHEET 02458 Pg
Page 29 and 30:
Inhalation : Move exposed person to
Page 31 and 32:
ack. Extremely explosive in the pre
Page 33 and 34:
equired by the Controlled Products
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
DR Material Safety Data Sheet acc.
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
EMERGENCY AND FIRST AID PROCEDURES
Page 53 and 54:
Battery Fluid, Acid Material Safety
Page 55 and 56:
Battery Fluid, Acid Material Safety
Page 57 and 58:
5. FIRE AND EXPLOSION HAZARDS Extin
Page 59 and 60:
MATERIAL REFERENCE NO: 105700 Page
Page 61:
Page 4 of 4 MATERIAL SAFETY DATA SH
Page 65 and 66:
Page 4 of 4 MATERIAL SAFETY DATA SH
Page 67 and 68: DR Material Safety Data Sheet acc.
Page 69 and 70: DR Material Safety Data Sheet acc.
Page 71 and 72: ITW Consumer - Devcon/Versachem Eff
Page 73 and 74: ITW Consumer - Devcon/Versachem Com
Page 75 and 76: Product Name: QD Contact Cleaner (a
Page 77 and 78: QD Contact Cleaner (aerosol) 72130
Page 83 and 84: Product Identity: ALL-STATE COPPER
Page 89 and 90: Skin: Get medical aid immediately.
Page 91: European/International Regulations
Page 97 and 98: Material Safety Data Sheet https://
Page 107 and 108: MATERIAL SAFETY DATA SHEET 3M Duct
Page 115 and 116: No known applicable information. DO
Page 117: DOW CORNING CORPORATION Material Sa
Page 121 and 122: Hazard Class: 3 UN/NA Number: UN 19
Page 123 and 124: CAS Number Wt % Component Name 1330
Page 125 and 126: Material Safety Data Sheet 1. CHEMI
Page 127 and 128: M A T E R I A L S A F E T Y D A T A
Page 135 and 136: Nelson Firestop Products 3. HAZARD
Page 137 and 138: 9. PHYSICAL and CHEMICAL PROPERTIES
Page 139 and 140: National Volatile Organic Compound
Page 141 and 142: [HOME] [SEARCH] [PREV LIST] [CURR L
Page 143 and 144: 7. HANDLING AND STORAGE -----------
Page 145 and 146: ---REPRODUCTIVE TOXICOLOGY (SUMMARY
Page 147: ***********************************
Page 152 and 153: Chemical pH........................
Page 154 and 155: Other Protective Equipment.........
Page 156 and 157: Section VI - Health Hazard Data Sec
Page 158: Engine Paints ENG/KRI Section 3 —
Page 167 and 168: Grainger MSDS Lookup SECTION II - H
Page 169 and 170:
Grainger MSDS Lookup IF ON SKIN: RE
Page 171 and 172:
153-8180 14 00 MATERIAL SAFETY DATA
Page 173 and 174:
153-8180 INCOMPATIBILITY None known
Page 175 and 176:
MATERIAL SAFETY DATA SHEET This MSD
Page 177:
SECTION IV - HEALTH HAZARD INFORMAT
Page 190 and 191:
64742−94−5 > 50 NAPHTHA, PETROL
Page 192 and 193:
Mutagenicity: Not available. Synerg
Page 201 and 202:
MATERIAL SAFETY DATA SHEET PROPANE
Page 203 and 204:
INHALATION LC50: Testing not conduc
Page 207 and 208:
MATERIAL SAFETY DATA SHEET DiversiT
Page 209 and 210:
MATERIAL SAFETY DATA SHEET DiversiT
Page 211 and 212:
MATERIAL SAFETY DATA SHEET State Ch
Page 213 and 214:
FICHE SIGNALÉTIQUE State Chemical
Page 215 and 216:
PLANILLA DE DATOS DE SEGURIDAD DEL
Page 217 and 218:
Material Safety Data Sheet HMIS May
Page 219 and 220:
DOW CORNING CORPORATION Material Sa
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Spitfire RTU Power Cleaner HMIS NFP
Page 229 and 230:
Stability: Polymerization: Hazardou
Page 231 and 232:
MSDS - KP1099 Click here to go back
Page 233 and 234:
MSDS - KP1099 Skin: WASH SKIN WITH
Page 235 and 236:
MSDS - KP1099 Chemical Stability: S
Page 237 and 238:
PIRS: Material Safety Data Sheet MA
Page 239 and 240:
PIRS: Material Safety Data Sheet HI
Page 241 and 242:
PIRS: Material Safety Data Sheet OF
Page 243 and 244:
EMERGENCY OVERVIEW Grey to silver w
Page 245 and 246:
**NOTE** In the event of an acciden
Page 247 and 248:
ECOTOXICITY No data available. ENVI
Page 249 and 250:
REVISIONS Revision Number: 5 PREPAR
Page 251 and 252:
MATERIAL SAFETY DATA SHEET RAY3126
Page 253 and 254:
SECTION 9: PHYSICAL AND CHEMICAL PR
Page 255 and 256:
MATERIAL SAFETY DATA SHEET RAY3126
Page 261 and 262:
Material Safety Data Sheet Section
Page 263 and 264:
Product Name: Bee Blast TM Wasp & H
Page 265 and 266:
Product Name: Bee Blast TM Wasp & H
Page 267 and 268:
Section 1: Product & Company Identi
Page 269 and 270:
Product Name: Lithium Complex Wheel
Page 271 and 272:
May be irritating to the skin causi
Page 273 and 274:
Handling: Surfaces that are suffici
Page 275 and 276:
SECTION 11 TOXICOLOGICAL INFORMATIO
Page 277 and 278:
CFR 1910.1200. Comprehensive Enviro
Page 279 and 280:
medical facility for additional tre
Page 281 and 282:
THE INFORMATION CONTAINED IN THIS D
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Product code 0174 Material Safety D
Page 299 and 300:
Product code 0174 Section 14. Trans
Page 301 and 302:
Product No. 1000 Product name: ZEP
Page 303 and 304:
Zep, Inc. 1310 Seaboard Industrial
Page 305 and 306:
Product code 0045 Section 12. Ecolo
Page 307 and 308:
Product code 0972 Section 6. Accide
Page 309 and 310:
Zep Sales & Service, A Unit of Zep
Page 311 and 312:
Product code 0607 Section 12. Ecolo
Page 313 and 314:
Product code 0282 Section 4. First
Page 315:
Product code 0282 Section 14. Trans
Page 320 and 321:
41303 Prolonged overexposure to haz
Page 322 and 323:
41303 SECTION 13 — DISPOSAL CONSI
Page 324 and 325:
TOXICOLOGICAL PROPERTIES Routes of
Page 326 and 327:
Page 328 and 329:
Safety data sheet MASTERFLOW 928 GR
Page 330 and 331:
Page 332:
show all

Print MSDS - Miller Electric Company Publications

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?