01.06.2013 Views

Print MSDS - Miller Electric Company Publications

Print MSDS - Miller Electric Company Publications

Print MSDS - Miller Electric Company Publications

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Section VI - Health Hazard Data<br />

Section VII - Precautions for Safe Handling and Use<br />

Page 2 of 2<br />

G88<br />

Route(s) of Entry: Inhalation? X Skin? X Eyes? X<br />

Ingestion? X<br />

Health Hazards (Acute/Potential Health Effects): EYES: May cause mild irritation. Symptoms include stinging,<br />

tearing and redness. SKIN: May cause mild skin irritation. Prolonged or repeated contact may dry the skin. Absorption<br />

from prolonged or massive skin contact may cause poisoning. INHALATION: Avoid breathing vapors or mists. May<br />

cause dizziness, nausea, headache or loss of consciousness. INGESTION: Harmful of fatal if swallowed. Aspiration<br />

hazard - this material can enter lungs during swallowing or vomiting and cause lung inflammation and damage.<br />

Health Hazards (Chronic/Long Term Effects): Reports have associated repeated and prolonged occupational<br />

overexposure to solvents with permanent brain and nervous system damage.<br />

Signs and Symptoms of Overexposure: Stomach or intestinal upset (nausea, vomiting, diarrhea) irritation (nose, throat,<br />

airways), central nervous system depression (dizziness, drowsiness, weakness, fatigue, nausea, headache,<br />

Emergency i and) First Aid Procedures: EYES/SKIN: Immediately flush eyes with plenty of water for at least 15<br />

minutes. Get medical attention immediately. Remove contaminated clothing and shoes. Wash clothing before reuse.<br />

INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.<br />

INGESTION: Seek medical attention immediately. Aspiration hazard: DO NOT induce vomiting or give anything by<br />

mouth because this material can enter the lungs and cause severe damage. Do not leave individual unattended.<br />

Steps to Be Taken in Case Material is Released or Spilled: Stop all leaks. Isolate hazard area. Keep unnecessary and<br />

unprotected personnel from entering. Absorb spill with inert material (e.g. dry sand, earth). Eliminate all ignition<br />

sources. Prevent runoff from entering drains, sewers, streams or other bodies of water. Absorb unrecoverable product.<br />

Transfer contaminated absorbent, soil and other materials to containers for disposal.<br />

Waste Disposal Method: Dispose in accordance with local, state, & federal regulations. See label for further<br />

Precautions i i to Be Taken in Handling and Storing: Follow all <strong>MSDS</strong>/label precautions even after container is emptied<br />

because they may contain product residues. Use with adequate ventilation. Do not get in eyes, on skin or on clothing.<br />

Store in a cool dry place. Keep container closed when not in use.<br />

Other Precautions: KEEP OUT OF REACH OF CHILDREN<br />

Section VIII - Control Measures<br />

Respiratory Protection (Specify Type): When Required use Organic Vapor Cartridge Ventilation: Good/General<br />

Protective Gloves: Nitrile or Neoprene Gloves<br />

Eye Protection: Safety Glasses or Goggles<br />

Other Protective Clothing or Equipment: Prolonged/repeated contact wear impervious clothing and boots.<br />

Work/Hygienic Practices: Wash hands with soap and water after using product

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!