Print MSDS - Miller Electric Company Publications
Print MSDS - Miller Electric Company Publications
Print MSDS - Miller Electric Company Publications
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
M A T E R I A L S A F E T Y D A T A S H E E T PAGE: 4<br />
Product: D.E.R.* 332 EPOXY RESIN<br />
Product Code: 19251<br />
Effective Date: 04/16/04 Date <strong>Print</strong>ed: 04/17/04 MSD: 002199<br />
------------------------------------------------------------------------<br />
PROTECT PEOPLE: Isolate area. Keep unnecessary and unprotected<br />
personnel from entering the area. Use appropriate safety<br />
equipment. For additional information, refer to Section 8,<br />
Exposure Controls/Personal Protection. Refer to Section 7,<br />
Handling, for additional precautionary measures.<br />
PROTECT THE ENVIRONMENT: Prevent from entering into soil,<br />
ditches, sewers, waterways and/or groundwater. See Section<br />
12, Ecological Information.<br />
CLEANUP: Absorb with material such as sand or polypropylene or<br />
polyethylene fiber products. Collect in suitable and properly<br />
labeled containers. Remove residual with soap and hot water.<br />
Solvents are not recommended for clean up unless the recommended<br />
exposure guidelines and safe handling practices for the specific<br />
solvent are followed. Consult appropriate solvent SDS for<br />
handling information and exposure guidelines.<br />
7. HANDLING AND STORAGE<br />
HANDLING: Avoid contact with skin and clothing. Wash thoroughly<br />
after handling. See Section 8, Exposure Controls/Personal<br />
Protection.<br />
STORAGE: Recommended pumping and storage temperature range is<br />
125F to 140F (51C to 60C). Additional storage information on<br />
this product may be obtained by calling your Dow sales or<br />
customer service contact. Ask for a product brochure.<br />
8. EXPOSURE CONTROLS/PERSONAL PROTECTION<br />
ENGINEERING CONTROLS: Good general ventilation should be<br />
sufficient for most conditions.<br />
PERSONAL PROTECTIVE EQUIPMENT<br />
EYE/FACE PROTECTION: Use safety glasses.<br />
SKIN PROTECTION: Use protective clothing chemically resistant<br />
to this material. Selection of specific items such as faceshield,<br />
gloves, boots, apron or full body suit will depend on<br />
operation. Remove contaminated clothing immediately, wash<br />
skin area with soap and water, and launder clothing before<br />
reuse or dispose of properly. Items which cannot be<br />
decontaminated, such as shoes, belts and watchbands, should<br />
(Continued on page 5)<br />
* OR (R) INDICATES A TRADEMARK OF THE DOW CHEMICAL COMPANY
Change language