Print MSDS - Miller Electric Company Publications

DOW CORNING CORPORATION
Material Safety Data Sheet
Page: 5 of 8
Version: 1.3
Revision Date: 2011/01/24
DOW CORNING(R) GENERAL PURPOSE SILICONE SEALANT CLEAR
Comments: Product evolves acetic acid (HOAc) when exposed to water or humid air. Provide ventilation
during use to control HOAc within exposure guidelines or use respiratory protection.
Note: These precautions are for room temperature handling. Use at elevated temperature or aerosol/spray applications may require
added precautions.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical Form: Paste
Color: Colorless
Odor: Acetic acid odor
Specific Gravity @ 25°C: 0.99
Viscosity: Not determined.
Freezing/Melting Point: Not determined.
Boiling Point: Not determined.
Vapor Pressure @ 25°C: Not determined.
Vapor Density: Not determined.
Solubility in Water: Not determined.
pH: Not determined.
Volatile Content: Not determined.
Flash Point: Not applicable.
Autoignition Temperature: Not determined.
Flammability Limits in Air: Not determined.
Note: The above information is not intended for use in preparing product specifications. Contact Dow Corning before writing
specifications.
10. STABILITY AND REACTIVITY
Chemical Stability: Stable.
Hazardous
Polymerization:
Hazardous polymerization will not occur.
Conditions to Avoid: None.
Materials to Avoid: Oxidizing material can cause a reaction. Water, moisture, or humid air can cause hazardous
vapors to form as described in Section 8.
Hazardous Decomposition Products
Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition
products: Carbon oxides and traces of incompletely burned carbon compounds. Silicon dioxide. Formaldehyde.
11. TOXICOLOGICAL INFORMATION
Special Hazard Information on Components