Radio Navigation Equipment - Signalspaning.se
Radio Navigation Equipment - Signalspaning.se
Radio Navigation Equipment - Signalspaning.se
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Test Oscillator I-173,specifically designed for<br />
pre-flight checking of localizer .receivers, provides radio<br />
frequency oscillation modulated by 90 and 150 cycle spark<br />
gap and radiates a signal for checking the receiver under<br />
test Indicator I-101, a component of the localizer receiver<br />
installation, indicates operation by right or left movement<br />
of the vertical needle.<br />
This oscillator is mounted within a wooden carrying<br />
ca<strong>se</strong> which also provides space for the two Batteries<br />
BA-35 required to power it, and a two position toggle switch<br />
on the top of the ca<strong>se</strong> provides a choice of the 90 or 150<br />
cycle modulation.<br />
LASSFI[P<br />
Army Supply Program requirements as of 22<br />
January 1945 were4576for the calendar year 1944 and 253<br />
for 1945.<br />
POWER SOURCE ' 2 BATTERIES BA-35<br />
1. 5 VOLTS<br />
POWER OUTPUT RF CARRIER UNCALIBRATED<br />
AND MODULATED AT 90 OR<br />
150 CYCLES<br />
FREQUENCY RANGE 108.3-110.3 MC<br />
TYPE OF SIGNAL MODULATED<br />
TEST OSCILLATOR I-173 TOTAL WEIGHT 9 LBS.<br />
Component<br />
Test Set<br />
Nay 1945<br />
Nomenclature<br />
1-173<br />
Size<br />
12" x 4" x 7"<br />
I-173<br />
Weight<br />
9 Lbs.