HiPath 1200 optiPoint 500 economy optiPoint 500 basic optiPoint ...

Making Calls – Basic Functions
Step by Step
18
Speaker
Speaker
Release
The other party answers with speaker:
n Lift the handset.
or On-hook dialing: use speakerphone mode (not available
with optiPoint 500 economy and optiPoint 500 basic).
or
The called party does not answer or is busy:
Press the key. The LED goes out.
Press the key.
Your HiPath 1200 may also be programmed so
that you have to either press the Internal key or
enter the internal code before you dial an internal
number.
To call an external party, you have to enter an external
code before dialing the party’s telephone
number (automatic trunk seizure/prime line is not
active; consult service personnel).
When automatic trunk seizure is active, you will
hear a continuous tone when you lift the handset.
Switching to Speakerphone Mode
This function is not available with
optiPoint 500 economy and optiPoint 500 basic.
Precondition: You are conducting a call with the handset.
and t Hold down the key and replace the handset. Then release
the key and continue the call.
Switching to the Handset
This function is not available with
optiPoint 500 economy and optiPoint 500 basic.
Precondition: You are engaged in a call in speakerphone
mode.
n and s Lift the handset. Continue the call.