TEMS Pocket T610.pdf - Index of

TEMS Pocket GSM Т610/T616 User's Manual
3.12. GPRS Cell/PDP(10)
20
3.12.1. GPRS Cell Configuration
Line 1 repeats some basic information. Lines
2-4 show data on the configuration of the
GPRS cell.
L: Logical Channel
• В: ВССН
• P: PBCCH, p: Hopping PBCCH
• S: SDCCH, s: Hopping SDCCH
• T: TCH, t: Hopping TCH
• D: PDTCH, d: Hopping PDTCH
BC: Serving Cell BCCH ARFCN
BS: Base Station Identity Code (BSIC)
RxLv: Received Signal Strength (RxLev),
numeric/graphic
A: GPRS Attached {A: Attached, -: Not
attached}
S: System Information 13 position {N: Normal
BCCH, E: Extended BCCH, -: Not present}
NMO: Network Mode of Operation {I, II, III};
see appendix A. 10, page 62
DX: DRX Timer Max, see GSM 04.60, sec.
5.5.1.5
Т8: Т3168 timer start value (Packet Uplink
Assignment Timer), see GSM 04.60, sec.
13.1 {value in hundreds of milliseconds,
assigned in System Information}
T192:T3192 timer start value (Packet Final
Block Timer), see GSM 04.60, sec. 13.1
{value in ms, assigned in System
Information}
G: GMM State {-: No GPRS available, I: Idle,
R: Ready, S: Standby}
T3314: T3314 timer start value (GMM Ready
Timer), Current/Start; see GSM 04.08, sec.
4.7.2
PDP Address: IPv4 PDP address (12digit
number)