Airetool Tube Cleaner and Expanders Catalog - Tecno Italia s.r.l

Cable cylinder
assists operator in
easy up/down
movement
Arm is mounted to
precision ground rod
with linear bearings
for smooth vertical
movement
The “basic” three foot and
five foot vertical unit is designed
for the adaptation of normally hand-
held applications such as tube end facing, tube cutting, tube
pulling and tube expanding as well as many applications that
are not related to the tube installation or removal process.
ATR 850 AL
AUTO-LUBE
Basic Unit
Ring enables unit
to be moved with
overhead crane
Column is available
in two heights:
6 ft. (1830 mm) or
8 ft. (2440 mm)
Control box has
1/2 in “tee” for tool
air supply, and
regulator for cable
cylinder control
MODEL ATR-850 AIRETROL
Precision ground rod is
rigidly mounted
to vertical
steel column.
Two precision bearings
at pivot points provide
virtually effortless
movement
Heavy gauge steel
used in balance arms
helps absorb tool
torque reaction,
balances heavy tools
Large rubber
tires make short
moves possible
Automated Unit
The automated configuration
of the DAS system is designed mainly
for use with “ATR” tube rolling controls as
an automated tube rolling system. This unit is fitted with
electrically actuated pneumatic controls that allow for the
automatic cycling of the Airetools for increased production.
Auto-Lube
The Auto Lube Accessory used with the ATR AIRETROLS
in conjunction with 800/1200 series expanders increases
expander life.
ATR 850 AL 8405390
ATR 1550 AL 8405388
Automated control box has
3/4" quick-change inlet with
valve; 1/2" quick-change outlet
with valve; regulator and gauge
for air cylinder; static pressure
gauge for trouble shooting; 4-way
valve for AIRETROL control
Adapter kits enable
standard motors and
tools to be used with
balance arm.
ATR model AIRETROLS
have power signal light,
on/off switch and manually
controlled reverse switch.
Galvanized serrated
steel grate folds down
to provide safer footing
for operator (fold-down
section not shown)
Speed & Torque 90 psig Air Pressure*
Free Maximum Minimum Overall Side to Operating CFM Drive Tube Chucks
Model No. Part No. Speed Torque Torque Length Weight Center Hose Square Capacities*
RPM In. lbs. Nm In. Lbs. Nm In. mm Lbs. Kg In. mm In. mm In. mm incl. opt.
ATR-850-1250 8405374 1300 126 14.2 9.6 1.08 17-3/4 450 15.3 6.9 3-1/8 79 1/2 10 64 3/8 3/4 19 3/8 Q.C. 1/2 Q.C.
Speed & Torque 90 psig Air Pressure*
Free Maximum Minimum Overall Side to Operating CFM Drive Tube Chucks
Model No. Part No. Speed Torque Torque Length Weight Center Hose Square Capacities*
RPM Ft. lbs. Nm Ft. Lbs. Nm In. mm Lbs. Kg In. mm In. mm In. mm incl. opt.
ATR-1550-900 8405375 745 33.8 45.8 4.8 6.5 18 457 24 10.9 3 76 1/2 13 74 1/2 1-1/2 38.1 3/8 & 1/2 Q.C. 3/4-1
ATR-1550-250 8405376 190 110 149.1 13.3 18 19-3/4 501 29 13.1 3 76 1/2 13 55 3/4 2-1/2 63.5 3/4 3/8 & 1/2 Q.C.
Refer to page 5 for description of Rapid Select. *Varies depending on tube material, guage and tube sheet thickness.
Airetool Rolling Controls
Tool Holding Systems
29