Airetool Tube Cleaner and Expanders Catalog - Tecno Italia s.r.l
Airetool Tube Cleaner and Expanders Catalog - Tecno Italia s.r.l
Airetool Tube Cleaner and Expanders Catalog - Tecno Italia s.r.l
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
70<br />
<strong>Tube</strong> <strong>Cleaner</strong>s<br />
Heat Exchanger <strong>and</strong> Condenser <strong>Tube</strong> <strong>Cleaner</strong>s<br />
Clean <strong>Tube</strong>s Equal Higher Efficiency<br />
All piping, heat exchanger <strong>and</strong> boiler tubes accumulate<br />
scale over various periods of use. This scale decreases<br />
flow, retards heat transfer, <strong>and</strong> consequently increases fuel<br />
consumption <strong>and</strong> lowers efficiency.<br />
Heat Exchanger <strong>and</strong> Condenser<br />
<strong>Tube</strong> <strong>Cleaner</strong>s<br />
Complete cleaner consists of an air motor with integral<br />
water feed valve couplings; up to 22 ft. of shafting with<br />
necessary couplings (please specify shaft length<br />
required); motor shaft wrench <strong>and</strong> an extra set of motor<br />
blades.<br />
The CC 475 <strong>Cleaner</strong> Complete also includes two drills<br />
of any type or size up to 1", three spiral brushes up to<br />
1" <strong>and</strong> 15 feet of 3/8 inch water hose.<br />
CC-375-1, 325-1 & 325-HP: Includes Ball bearing<br />
trolley <strong>and</strong> rope block.<br />
Water Feed Attachment – WF 100<br />
For use with air drills. Available with various size<br />
coupling drives.<br />
Input <strong>and</strong> output drive thread: 5/8-18 UNF.<br />
Water inlet: 3/8 NPT.<br />
WF-107 Adapter required,<br />
1/2 shank with 3 flats for drill chuck.<br />
Model No. Range RPM<br />
Weight Length<br />
Lbs. Kg In. mm<br />
Air Inlet Operating Air Pressure Water Inlet Max. Water Pressure<br />
Lightweight Condenser <strong>Cleaner</strong>s<br />
CC-475 up to 1 in. (25.4 mm) ID <strong>Tube</strong>s 3800 10 4.53 15-3/4 400 1/2 in. NPT 90-100 psi (6-7 kg/cm 2 ) 3/8 in. NPT 100 psi (7 kg/cm 2 )<br />
CC-475-PS up to 1-1/2 in. (38.1 mm) ID <strong>Tube</strong>s 2300 10 4.53 15-3/4 400 1/2 in. NPT 90-100 psi (6-7 kg/cm 2 ) 3/8 in. NPT 100 psi (7 kg/cm 2 )<br />
Geared Drive <strong>Cleaner</strong>s*<br />
CC-375-1 up to 1-3/4 in. (44.4 mm) ID <strong>Tube</strong>s 1200 38 17.2 19 482.6 1 in. NPT 90-100 psi (6-7 kg/cm 2 ) 3/8 in. NPT 100 psi (7 kg/cm 2 )<br />
CC-325-1 up to 2 in. (50.8 mm) ID <strong>Tube</strong>s 800 42 19.0 19 482.6 1 in. NPT 90-100 psi (6-7 kg/cm 2 ) 3/8 in. NPT 100 psi (7 kg/cm 2 )<br />
CC-325-HP up to 2 in. (50.8 mm) ID <strong>Tube</strong>s 800 44 19.9 19 482.6 1 in. NPT 90-100 psi (6-7 kg/cm 2 ) 1/2 in. NPT 5000 psi (350 kg/cm 2 )<br />
* Water hose not included.<br />
WF 100<br />
CC 475<br />
ADDITIONAL EQUIPMENT<br />
CC-475: Allen Wrench; Two drills of any type or size up to 1 in.<br />
Three spiral brushes up to 1 in.
Change language