Airetool Tube Cleaner and Expanders Catalog - Tecno Italia s.r.l

50
Airetool Tube Removal Tools
ATP Tube Pullers
Electric/Hydraulic SemiAutomatic Tube Pullers
For Light To Medium Duty Applications.
The Airetool Model ATP-9400-A tube puller develops 13-
3/4 tons of pulling power to easily remove tubes up to 1
in. O.D. from tube sheets up to 1-1/2 in. thickness.* Quick
attaching grippers bite uniformly into the tube I.D. as the
piston retracts, pulling the tube from the sheet.
This puller provides a full 4-3/4 in. total pulling length
through a double 2-3/8 in. pull. Cycle time is controlled
from the handpiece through a 24 volt cycle control panel,
providing better operator control and improving
productivity. The puller reverses instantly at the end of the
pulling cycle or when the trigger is released.
The durable hydraulic pump has large wheels for easier
movement over uneven surfaces and heavy duty lifting
handles. A convenient hanger on the lifting handle allows
handpiece to be neatly stored when moving unit or
between jobs.
Control cables and hoses are wrapped together for
greater safety, and the hydraulic hoses have quick
disconnect fittings for simplified attachment to the pump
and cylinder.
Power supply 120 volt 60 Hz. Other voltages available
upon request.
*Puller capacity of the ATP will vary with tube wall thickness, tube sheet
thickness and tube material. For an evaluation, contact your nearest
CooperTools sales representative.
ATP-9000B-HCA
ATP9400P
ATP-9000B
The following components are required for
most normal tube pulling applications:
Part Number Description Stock Number
ATP-9000B RAM Assembly 5525469
ATP-9400-P Pump Unit 2900589
ATP-9000B-HCA Hose/Cord Assy-15' 5525470*
ATP-9022- Gripper Kit See Chart Page 54
Airetool Hydraulic Tube Pullers are also available 230 volt,
50 Hz 1 Ph. Contact customer service for details.
*15' long