Data Submission Manual 5: How to complete a - ECHA - Europa

More documents

Recommendations

Info

Data Submission Manual Figure 13: Section 1.1 Molecular and structural information 4.1.2. Section 1.2 - Composition At least one composition must be indicated (normally, one composition should be sufficient). If several "Substance composition" blocks are created then every block must be complete. The degree of purity shall be specified (Figure 14). It means that at least one of the two boxes must be filled in and that a unit has to be selected. Figure 14: Substance composition block Version: 3.1 20
Part 05 - How to complete a technical dossier for registrations a PPORD notifications Release date: February 2013 21 At least one constituent should be indicated for each composition. For each constituent, impurity or additive, a check will be carried out to ensure that a Reference substance is attached and that as a minimum, either the "Typical concentration" or the "Concentration range" has been filled in and that the unit has been selected (Figure 15). Figure 15: Concentrations In addition, the function of additives has to be provided by making a selection from the drop-down list "Function". If "other" is selected, then the free-text adjacent field must be filled in (Figure 16). If an impurity or additive is considered relevant for classification and labelling of a substance, the relevant tickbox should be ticked (Figure 16). Figure 16: Tickboxes relevant for impurities and/or additives
Page 1 and 2: Part 05 - How to complete a technic
Page 19: Part 05 - How to complete a technic
Page 71 and 72:
Part 05 - How to complete a technic
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97:
EUROPEAN CHEMICALS AGENCY ANNANKATU
show all

Data Submission Manual 5: How to complete a - ECHA - Europa

Create successful ePaper yourself

Delete template?

Save as template?