Vendor Routing Guide - CSI Vendor Manual
Vendor Routing Guide - CSI Vendor Manual
Vendor Routing Guide - CSI Vendor Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Vendor</strong> <strong>Routing</strong> <strong>Guide</strong> Lane Bryant & Catherines<br />
3.2.2 Packing Bulk Units:<br />
3.1.2.3 Bulk units must be packed using the largest Standard Apparel Carton<br />
dimension described in Section 2.1.2.<br />
3.1.2.4 The units may be placed vertically to fill any void space resulting from<br />
column stacking bulk units within the Standard Apparel Carton (see<br />
below).<br />
3.3 Other Specifications:<br />
Top View Top View<br />
3.3.1 Pack each PO in separate cartons. Do not mix PO’s within cartons.<br />
3.3.2 Pack a standard quantity of units or pre-packs per carton for each PO/color/size.<br />
3.3.2.1 A Standard Quantity is the amount that fills a carton by size.<br />
3.3.3 Pack cartons as densely as possible without damaging goods or causing<br />
cartons to bulge.<br />
3.3.4 Fold the garment to fit within the dimensions of the Standard Apparel Carton,<br />
unless specified in the Technical Design Package.<br />
3.3.5 Use of a protective cardboard liner, placed inside the carton on top of the<br />
merchandise, in order to avoid potential damage is recommended.<br />
Version 8.0, Last Modified: 5/14/2013 Page 11 of 45