Vendor Routing Guide - CSI Vendor Manual
Vendor Routing Guide - CSI Vendor Manual
Vendor Routing Guide - CSI Vendor Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Vendor</strong> <strong>Routing</strong> <strong>Guide</strong> Lane Bryant & Catherines<br />
2.5 Banding, Strapping, Staples or String/Wire Tying<br />
2.5.1 Banding, strapping, staples or string/wire tying of cartons as a means of closure<br />
is not permitted unless mandated by country of origin regulations. Please<br />
contact DC <strong>Vendor</strong> Coordination if required to seal cartons using this method.<br />
2.6 Corrugate Specifications<br />
2.6.1 A Regular Slotted Container (RSC) must be used that has a minimum of the<br />
following:<br />
2.7 Carton Design<br />
2.6.1.1 125 kg (275 lbs) burst strength (typically a double wall/ 7 to 9-ply<br />
carton)<br />
2.6.1.2 Edge Crush Test (ECT) with a minimum of 21.8 kg (48 lbs), or<br />
equivalent<br />
is required.<br />
2.7.1 Cartons must be of rectangular construction.<br />
2.7.2 The width of the carton must be greater than the height (see below).<br />
2.7.3 The length of the carton must be greater than the width (see below).<br />
2.7.4 Square-shaped cartons will turn during processing; causing UCC label<br />
misreads.<br />
2.7.5 Cartons with a height greater than the width will fall over during processing; also<br />
causing UCC label misreads.<br />
Unacceptable Cartons<br />
Width Is Too Small Length Is Too Small<br />
Version 8.0, Last Modified: 5/14/2013 Page 8 of 45
Change language