Vendor Routing Guide - CSI Vendor Manual

Vendor Routing Guide Lane Bryant & Catherines
8.2.2.1 Individual items must be packed in an appropriately sized, sealed poly-bag
or zip lock bag with the SKU label facing out to be visible on either side of
the bag.
8.2.2.2 Additional insulations of individual items are permitted when deemed
necessary to protect the items from the damage during transit. When
additional insulation is used, the SKU label must be placed securely on the
outer shell of the packaging as price ticket on the item is not visible.
8.2.3 Boxed Items:
8.2.3.1 You do not need to poly-bag items that are already boxed such as shoes,
jewelry, perfumes, watches, etc. As long as they are already in a box upon
arrival into the Distribution Center.
8.2.3.2 Each boxed item requires a SKU barcode labeled attached to the top of
the box.
8.2.3.3 The placement of the barcode label should be the lower left hand corner of
the box.
8.2.3.4 Shoe Boxes: A rubber band must be placed around the shoe box to secure
it from opening. This applies for both two piece boxes and hinged shoe
boxes.
8.2.3.4.1 The SKU barcode must be applied on the bottom of the shoe
box. Do not apply SKU barcode to the top lid.
8.2.3.5 Earrings: Pack each item in an appropriate size clear sealed poly-bag
or zip lock bag.
8.2.3.5.1 Earrings must be packed on a card or chipboard and as single
units.
8.2.3.6 Necklaces: Pack each item in an appropriately sized clear, sealed, polybag
or zip log bag.
8.2.3.6.1 Chipboards and clear ape are to be used for those necklaces
that can be tangled or damaged when packed in a bag.
8.2.3.6.2 Use the clear tape to secure the item to onto the chipboard
DO NOT package jewelry as multiples. Each item MUST be in its own poly bag.
Version 8.0, Last Modified: 5/14/2013 Page 34 of 45