You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• Connecting an Ai-NET compatible AV head unit / Digital Audio Processor<br />
AUX Video<br />
Input Terminal<br />
RCA Extension<br />
Cable (included)<br />
AV Head Unit<br />
IVA-D105R, etc. (sold separately) Ai-NET Connector<br />
Remote Control<br />
Input Lead<br />
(white/brown)<br />
Video Output<br />
Connector<br />
Remote Control<br />
Output Lead<br />
(white/brown)<br />
Digital Output<br />
Terminal<br />
(Optical)<br />
DHA-S690<br />
Change the system switch on the AV<br />
head unit to “EQ/DIV”.<br />
Ai-NET Cable<br />
Fiber Optic Cable<br />
(sold separately)<br />
Ai-NET Connector<br />
Ai-NET Input<br />
Connector<br />
Digital Input<br />
Terminal (Optical)<br />
(Changer)<br />
Digital Audio Processor<br />
PXA-H701, etc.<br />
(sold separately)<br />
Ai-NET Cable (included)<br />
Ai-NET Input<br />
Connector<br />
(CHANGER IN)<br />
• Be sure to switch the head unit’s system switch before turning the power on.<br />
• Be sure to make the setting (DVD CHG or CD CHG) in “Setting the Connected Head Unit” (page 21) according to the connected Ai-NET<br />
compatible head unit.<br />
• If CD CHG is set in “Setting the Connected Head Unit” (page 21):<br />
If you want to play back a DVD Audio, set “Switching the input (non Ai-NET connections)” on the connected Alpine audio processor<br />
(PXA-H700, PXA-H701) to “Analog.” For details on operation, refer to the Owner’s Manual of the audio processor.<br />
• The switched Power Lead (Ignition) connection is not needed.<br />
• Also refer to the operating instructions of the other products in the system.<br />
• When connecting the optical digital output to a digital audio processor, be sure to make connection to the CHANGER connectors of the digital<br />
audio processor optical digital input connectors. This arrangement allows you to enjoy Dolby Digital 5.1 Channel Surround and other effects<br />
even when connection is made to the CHANGER connectors.<br />
Observe the following when using Fiber Optic Cable.<br />
• Be careful not to bend the fiber optic cable at a sharp angle.<br />
• Do not coil the fiber optic cable smaller than a 30 mm radius.<br />
• Do not place anything on top of the fiber optic cable.<br />
Setting of DHA-S690<br />
The DHA-S690’s system settings must be<br />
made after connections are completed.<br />
Before fixing the unit in place, refer to<br />
page 41 to change the system setting.<br />
System Switch<br />
1 2<br />
Switches to “1”.<br />
130.com.ua<br />
Autogood products internet store http://130.com.ua<br />
43-EN
Change language