User Manual

28
Effect
By using the camera’s digital processor, it is possible to add special effects to
your images
: No effect is added to the image
BLUE
: Captured images will be stored in black and
SEPIA
white.
B&W
: Captured images will be stored in a sepia tone
NORMAL
(a range of yellowish brown colours).
: Captured images will be stored in a blue tone.
: Captured images will be stored in a red tone.
[Program mode]
: Captured images will be stored in a green tone.
: Save the image in negative mode.
: User can set the tone of the R (Red), G (Green) and B (Blue) value.
These menus can be selected in the Special Effect mode only.
How to use the Custom Effect ( )
1. Select the [CUSTOM] effect menu
by using the Smart button.
CUSTOM
NEGATIVE
GREEN
RED
3. Select a desired value by using the Smart button.
2. Select the R, G or B menu by using
the Smart button.
Select: Exit:BACK
Exit:BACK
Icon
Quality / Frame rate
You can select the compression ratio appropriate for your application of the
captured images. The higher the compression ratio, the lower the picture quality.
Mode Still image mode
Movie clip mode
Sub menu Super Fine Fine Normal 30FPS 15FPS
File Type jpeg jpeg jpeg avi avi
INFORMATION
SUPER FINE
FINE
NORMAL
[STILL IMAGE mode]
30 FPS
15 FPS
[MOVIE CLIP mode]
This file format complies with the DCF (Design rule for Camera File system).
JPEG (Joint Photographic Experts Group) : JPEG is the image
compression standard developed by the Joint Photographic Experts Group.
This type of compression is most commonly used for compressing photos
and graphics because it can compress the files efficiently.