CELLULAR/PCS INTERCONNECTION ... - AT&T Clec Online

Page 166 of 250
APPENDIX WIRELESS PHYSICAL COLLOCATION/AT&T-13STATE
PAGE 41 OF 62
AT&T-13STATE/NEW CINGULAR WIRLESS PCS, LLC
020106
17.6.4 AT&T-13STATE must advise Wireless Collocator if extraordinary costs will be incurred within
twenty (20) business days of the Wireless Collocator’s request for space.
17.6.5 Extraordinary costs will only be billed upon receipt of the signed acceptance and construction will
not begin until receipt of the Wireless Collocator’s signed acceptance and payment.
18. RATE REGULATIONS (AT&T-13STATE DOES ALL WORK)
18.1 The Wireless Collocator may elect to have AT&T-13STATE provision the collocation site or the Wireless
Collocator may elect to hire an AT&T-13STATE Approved Tier 1 Vendor to provision the collocation site
per Section 21, CDOW (Collocator Does Own Work).
18.2 Rate Elements
All rates and charges for the following rate elements can be found in the Collocation Rate Summary.
18.2.1 Planning Fees
18.2.1.1 The Planning Fee, as specified in AT&T-13STATE’s Interconnector's Collocation Services
Handbook for Physical Collocation in AT&T-13STATE, recovers AT&T-13STATE’s costs
incurred to estimate the quotation of charges, project management costs, engineering
costs, and other related planning activities for the Wireless Collocator’s request for the
Physical Collocation arrangements. The initial Planning Fee will apply to the Wireless
Collocator’s Physical Collocation request. In addition, a non-standard Planning Fee will
apply when a request includes DC power requirements other than 2-10, 2-20, 2-30, 2-40,
2-50, or 2-100 Amp power feeds for Caged, Cageless, or Caged Common Collocation, or
2-100, 2-200, 2-300, or 2-400 Amp power feeds for Adjacent On-Site Collocation, or other
than integrated ground plane, or when floor space requirements are greater than four
hundred (400) square feet. Requests for additions to the initial request, such as the
addition of Wireless Collocator provided equipment that requires AT&T-13STATE to
engineer and purchase additional equipment will result in a Subsequent Planning Fee. A
major revision to the initial request for Physical Collocation that changes floor space
requirements, cable entrance facilities requirements, or changes DC Power Distribution
will be considered a total revision and result in the reapplication of an initial Planning Fee.
Rates and charges are as found in the Collocation Rate Summary.
18.2.2 Billing for Caged Shared and Caged Common Collocation Arrangements
18.2.2.1 Except for certain charges identified as related to Caged Shared Collocation, each
Wireless Collocator shall be billed separately and shall be able to order and provision
separately. In the case of Caged Shared Collocation, AT&T-13STATE shall bill the
original Wireless Collocator for space. Wireless Collocators located in a Caged Common
Collocation area shall have direct billing arrangements with AT&T-13STATE for floor
space and all other applicable interconnection arrangements.
18.2.3 Floor Space Charges
18.2.3.1 Caged Collocation
18.2.3.1.1 The Caged Collocation option provides the Wireless Collocator with an
individual enclosure (not including a top). This enclosure is an area
designated by AT&T-13STATE within an Eligible Structure to be used by the
Wireless Collocator for the sole purpose of installing, maintaining and
operating the Wireless Collocator-provided equipment.
18.2.3.1.2 AT&T-13STATE will provide Floor Space, floor space site conditioning, Cage
Common Systems Materials, Cage Preparation and Safety and Security
charges in increments of one (1) square foot. For this reason, Wireless
Collocator will be able to order space and a cage enclosure in amounts as
small as that sufficient to house and maintain a single rack or bay of