Description recipe

More documents

Recommendations

Info

To delete recipes you have to go to the Excel worksheet and delete it manually. This is only allowed for experts. Important: Make sure that you have a copy of the file before you delete single tables. Never delete the table named “data”. It is a necessary table for the start parameters and the file for stored data. New recipes will always be created on the basis of an existing one. Please press the button top right of the screen. Choose a recipe as a basis. Enter the name of the new recipe and press . 5.2.4 Step Name and Overview Under the Tab strip you can enter the name of the Step. The number will be generated automatically with a proceeding “S” for Step. Short names are recommended to keep the register smaller. If the register is wider than the screen, small arrows will appear top right which allow you to scroll to the steps in the invisible area. With the button you can go into a screen showing all the programmed steps. Selecting and double clicking a step brings you directly to this step in the recipe definition screen. AP-Miniplant - Operation Manual Mini Batch Plant Page 45
5.2.5 Paste new steps and delete steps New steps are generated copying old steps. You just go on the step you want to copy and press the button. Afterwards you can alter the values. A selected step will be deleted using the button. It is not possible to undo this operation. 5.2.6 Recipe Start and Stop Input screen for identification data before the recipe is started Pressing the button opens another window. Here you have to enter the data to identify your experiment. It is also used to generate the file name. Therefore it is necessary, that your identification code is unique. The name of the data file is “Project”_”Experiment No.”_”Experiment Index”.xls. In the example above it would be P1_A01_21.xls. The data is stored in a folder named “Data” which is a subfolder of the named as the operator. The field table length gives you the possibility to define the length of a table of data which you select by making the cells in line 299 bold which you want to have in there. Important: If you press the button during a recipe by mistake and acknowledge the safety Question of the system with yes, your experiment is stopped. 5.2.7 Data Acquisition To register the values you have to click the appropriate checkbox “data logging active” top left of the window. The button shows another form which will give you the possibilities you need after doing the experiments. You can generate curves, enter analytical values, show a table of the measured values. You can also open the files manually. They have a write-protection. The password to change the files is “example”. AP-Miniplant - Operation Manual Mini Batch Plant Page 46
Page 1 and 2: 5 Recipes 5.1 Entering the recipe f
Page 3: Important: To be sure that a recipe

Description recipe

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?