Description recipe

5.2.5 Paste new steps and delete steps
New steps are generated copying old steps. You just go on the step you want to copy and press the
button. Afterwards you can alter the values.
A selected step will be deleted using the button. It is not possible to undo this operation.
5.2.6 Recipe Start and Stop
Input screen for identification data before the recipe is started
Pressing the button opens another window. Here you have to enter the data to identify your
experiment. It is also used to generate the file name. Therefore it is necessary, that your identification
code is unique. The name of the data file is “Project”_”Experiment No.”_”Experiment Index”.xls. In the
example above it would be P1_A01_21.xls. The data is stored in a folder named “Data” which is a
subfolder of the named as the operator.
The field table length gives you the possibility to define the length of a table of data which you select
by making the cells in line 299 bold which you want to have in there.
Important:
If you press the button during a recipe by mistake and acknowledge the safety Question of
the system with yes, your experiment is stopped.
5.2.7 Data Acquisition
To register the values you have to click the appropriate checkbox “data logging active” top left of the
window.
The button shows another form which will give you the possibilities you need after doing the
experiments. You can generate curves, enter analytical values, show a table of the measured values.
You can also open the files manually. They have a write-protection. The password to change the files
is “example”.
AP-Miniplant - Operation Manual Mini Batch Plant Page 46