GREENSTAR™ 2100 & 2600 Display - StellarSupport - John Deere

Display Software Activations
The display comes preloaded and activated with
GreenStar Basics Software which includes:
Documentation
• Guidance
– Parallel Tracking
• Documentation
– Harvest Doc
– Map Based Prescriptions
– Field Doc including (Field Doc Sprayer, Field Doc
Planter, Field Doc Air Cart, and Field Doc
Connect)
Software activations are required to operate AutoTrac
and can be purchased from you local John Deere
Dealer.
Items REQUIRED to Activate AutoTrac
• Display Serial Number (Found in display)
Display Setup
• Display Challenge Code (Found in display)
• Comar order number (from dealer once order is
placed)
• Visit www.stellarsupport.com or call 888-GRN-STAR
to obtain 26 digit activation code.
Current Purchased Software Activation options are as
follows:
• SF1 AutoTrac — +/- 33 cm (+/- 13 in.) at receiver
• SF2 AutoTrac— +/- 10 cm (+/- 4 in.) at receiver
• SF1 to SF2 AutoTrac upgrade
• Pivot Pro (AutoTrac Circle operation for center
pivots, requires an AutoTrac activation first)
The display software activations (Pro-Modules) are 26
digit pin numbers that are separate from the StarFire
24 digit GPS activation number. The display software
is only activated once for the life of the display and
requires no other fees.
OUO6050,00016FA –19–08DEC05–1/1
30-1 011906
PN=32