AutoTrac Universal (ATU) - StellarSupport - John Deere

StarFire Height and Fore-Aft
Fixed-Axle Machines
(Row Crop, Sprayers)
SETUP - AUTOTRAC - PAGE 2
StarFire Height (in.) Enter the height of the StarFire
receiver. Height is measured from the ground to the top
of the dome.
StarFire Fore-Aft (in.) Enter the Fore-Aft measurement.
This is the distance from the fixed axle of the vehicle to
the receiver. The fixed axle is the rear axle on a row-crop
tractor and sprayer or the front axle on an articulated
tractor, windrower, combine, forage harvester, and cotton
harvester. For track machines, this measurement is 0.
The receiver must be at or in front of the fixed axle for all
machines except articulated tractors where the receiver is
behind the front axle.
A—Height B—Fore-Aft
Operator Presence
Operator Presence selects a seat switch or operator
activity monitor to detect operator presence.
Steer Asymmetry
Steer Asymmetry in certain vehicles, the hydraulic steering
system is configured in a manner in which the vehicle does
not steer the same in each direction. The end result of this
situation is that the vehicle consistently steers to one side
of the A—B line. Steering Asymmetry is a value that can be
Original GreenStar Display
PC8995 —UN—07MAR06
45-8
Articulated Machines
Combines, Self-Propelled Forage Harvester, Windrower, Cotton Picker
PC8996 —UN—07MAR06
PC8997 —UN—07MAR06
OUO6050,0001178 -19-08JUN09-1/1
OUO6050,000117A -19-08JUN09-1/1
changed to compensate for these differences in steering.
Please refer to the platform-specific document for your
vehicle for the appropriate Steering Asymmetry value.
This document can be found at www.StellarSupport.com
If your vehicle is not an asymmetric vehicle a value of 100
is used for Steering Asymmetry.
OUO6050,000117B -19-05JUN09-1/1
091411
PN=48