SCHEDULE OF RATES.pdf - Hindustan Petroleum Corporation ...

PIPE RAILING : Supply and fixing of 40 NB medium quality MS pipes(IS 1239 latest edition) for
top and bottom railings to angle iron posts for fixing the edges of the chain link fencing. Rate
includes fabn, cutting, bending of the MS pipe, supply and fixing of MS clamps at every post, with
nuts and bolts(all proper sized) and painting the railing with two coats of Zinc Phosphate Primer
and two coats of Synthetic enamel paint after proper cleaning /scrapping .
SHALIMAR/BERGER/ASIAN make 1st quality only.
40 CHAIN LINK FENCING SM 278.25
CHAIN LINK FENCING : Supply and fixing of 50 x 50mm opening size 10 SWG GI chain link
fencing to the angle iron post with 8 SWG GI hooks and nuts and railing with 14 SWG GI
continuous wire (all details shall be as per enclosed drawing ) up to a height of 1.8 m from the
ground level. Rate to include unrolling the bundle, erecting, tightening and fixing at 300 mm C-C
on the vertical portion of the posts to every top and bottom railing with 14 gauge MS wire.
41 BARBED WIRE FENCING MT 234.13
BARBED WIRE FENCING Providing and fixing 13 rows horizontal and two diagonals with two ply
12 SWG GI barbed wire fencing with barbes @ 100mm c/c . Angle iron post shall be paid
separately. For payment purpose measurement shall be taken for the lenth of plot boundary . No
measurement shall be taken for 13 rows individually.
42 HUME PIPES- 1000 MM DIA MT 5403.00
HUME PIPE- Supplying, laying, joining and aligning 1000mm DIA NP3 class RCC Hume pipes
conforming to IS-458 Latest Edition below approach road as directed. Rate to include joining with
cement mortar, excavation up to required depth and providing and laying PCC 1:2:4 haunching @
1m c/c , also including cutting, bending & supply and laying of 17 SWG annealed binding wire
inside the HUME Pipe for pulling cables in future.Test certificates from manufacture shall be
submitted and approved by EIC before use.1000 MM DIA
43 HUME PIPES- 900 MM DIA MT 5042.80
Same as above but size 900 mm dia
44 HUME PIPES- 600 MM DIA MT 3866.75
Same as above but size 600 mm dia
45 HUME PIPES- 450 MM DIA MT 2597.94
Same as above but size 450 mm dia
46 HUME PIPES- 300 MM DIA MT 963.54
Same as above but size 300 mm dia
47 HUME PIPES- 250 MM DIA MT 628.55
Same as above but size 250 mm dia
48 HUME PIPES-200MM DIA NP2 CLASS MT 575.42
Same as above but NP2 class & size 200 mm dia
49 HUME PIPES- 150 MM DIA NP2 CLASS MT 436.74
Same as above but NP2 class & size 150 mm dia
50 ANTI TERMITE TREATMENT SM 72.94
ANTI TERMITE TREATMENT Providing anti-termite treatment including diluting and injecting
chemical solution/ Neem base solution and creating a continuous barrier under and alround the
column pits, wall trenches, basement excavation, top surface of plinth filing, junction of wall and
floor, along the external perimeter of building, expansion joints, over the top surface of
consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. Complete
as per specification using Clorpyriphous emulsified cocentrate (20%) in 1% concentration ( or as
recommended by the manufacturer) or using Neem based solution.
51 WHITE RECTIFIED TILES FOR COMP SM 972.54
Providing and fixing 1'x2' white color rectified tiles (approved shade and make ) of First quality ,
free from crack fissures & flakes with straight edge s & perfect corners fixed at right angles as per
the design and pattern, incldg. applying 8mm thick backing plaster in 1:4 CM and fixing the tiles
with neatcement paste, finishing the joints with white cement to match the colour of tiles properly
cured & finished in all respects etc. complete.
52 CERAMIC TILE FLOORING 400mmX400mm SM 742.01
CERAMIC TILE FLOORING: Providing and laying (NITCO/KAJARIA/BELL/ H&R JOHNSON
MAKE)matt finish 1st quality Ceramic tiles of 6/8 mm thick of following size in flooring of
approved make and shade and free from cracks, warpage,fissures and flakes with straight edges
and perfect corner laid at right angle as per design and pattern over a bedding of cement mortan of
30 mm thick CM 1:5 finishing the joints neatly with white cement mixed with matching colour
pigment and finish in all respect and all material and labour complete. Size 400mm X 400 mm
53 CERAMIC TILE FLOORING 300mmX300mm SM 683.48
Same as above but size 300mmX300mm
54 VITRIFIED TILE FLRG. 400mmX400mm SM 1382.27
Seal and Signature of the tenderer Page 4 of 41