Stand alone Multi- channel Digital Video Recorder - Wintal

More documents

Recommendations

Info

„Apply‟ to save temporarily, all setting will lost when power is off. In the course of setting up the parameters, if the parameters needed to be set the same in all channels, you can select ‗ALL‘ after finishing the setup of parameters of one channel. The system will prompt a dialog box. When pressing ‗OK‘, parameters setup for all channels will be achieved. List: Press ‗List‘ to list schedule recording time table(Max.120 records) of current channel, records delete operation is available as shown in Fig. 38 Fig. 38 Four time modes could be showed in this menu including: One day, Daily, Every Tue., Monthly. One day is equal to ‗Once‘ Move cursor to one record with or on the front panel then move to the ―delete‖ box. Press ‗ENTER‘ to delete the record. Recording Alarm Setup. Enter ―Main Menu-Rec. &Alarm—Alarm‖ as shown in Fig. 39 45
Fig. 39 Move cursor with and on the front panel and select item with and . Record Duration: Length of recording whenever alarm or motion detection is activated. Default length: 10 minutes. Pre-record Time: Activate pre-record function including ―OFF、5s、15s、25s、30s‖. Default pre-record time: OFF Note: The max pre-record time of Ⅱ type 8 channel model is 5S. External Alarm Input Setting Enter ―Alarm In‖ to set external alarm input Alarm In: Select a alarm input port for setup Open: This is sensor type. Alarm Out: Activate alarm out or not. Rec. CH:When external alarm activated, relevant channel can be selected to record if recording period has been setup in ―Alarm Schedule‖ menu. Spot Camera: The channel, which external alarm happened in, can be selected to display as full screen. Buzzer Time:Buzzer time length when alarm, motion detection, video lost or video shelter is activated. Default length: 10 seconds. Schedule: Enter ―Alarm Schedule‖ interface to setup alarm period in which system will activate relevant 46
Page 1 and 2: Stand alone Multi- channel Digital
Page 3 and 4: Limitation of liability This public
Page 5 and 6: (Tightening torque: Approx. 0.49 N
Page 7 and 8: Content Chapter I Introduction.....
Page 9 and 10: Rec.&Alarm ........................
Page 11 and 12: Product Introduction 1. Compress S
Page 13 and 14: 12 Fig. 1 Ⅰ type 16 channel model
Page 15 and 16: 14 Fig. 5 8. Replace the top of the
Page 17 and 18: 6 VGA interface connect VGA display
Page 19 and 20: Back panel of Ⅲ type model Fig. 1
Page 21 and 22: Fig. 13 Note: 24V DC (1A), 120V AC
Page 23 and 24: ChapterⅢ DVR Operation Section 1
Page 25 and 26: ALARM Alarm indicator, flashing whe
Page 27 and 28: ENTER ―OK‖ key Select 1, 4 spli
Page 29 and 30: Section 2 IR remote device (optiona
Page 31 and 32: Mouse Option *Modify Number Double-
Page 33 and 34: Chapter IV System operation Section
Page 35 and 36: Cancel buzzer alarm Entry PTZ contr
Page 37 and 38: Fig. 27 In User Login box, language
Page 39 and 40: Note: If you need to modify system
Page 41 and 42: Video Format:Auto adapt according t
Page 43 and 44: Fig. 34 Move cursor with and on the
Page 45: Fig. 37 Move cursor with and on the
Page 49 and 50: Rec. CH:When alarm activated, relev
Page 51 and 52: Page flip: Use or to flip up or dow
Page 53 and 54: e obtained by system automatically.
Page 55 and 56: Resolution: Default resolution: CIF
Page 57 and 58: Fig. 48 Fig. 49 In ―Authority Set
Page 59 and 60: Fig. 52 Move cursor with and on the
Page 61 and 62: Fig. 54 Setup parameters for 485(1)
Page 63 and 64: Line: Select the line of the cruise
Page 65 and 66: Check information of current firmwa
Page 67 and 68: ChapterⅤ IE Monitor Section 1 Int
Page 69 and 70: user name. b) Video user number: su
Page 71 and 72: 3. PTZ, camera, IRIS control: adjus
Page 73 and 74: Info search 1. Click , entry ―Inf
Page 75 and 76: 7. Email function: provide the emai
Page 77 and 78: Chapter Ⅵ Frequency Asked Questio
Page 79: Information on Disposal for Users o

Stand alone Multi- channel Digital Video Recorder - Wintal

Create successful ePaper yourself

Delete template?

Save as template?