Stand alone Multi- channel Digital Video Recorder - Wintal
Stand alone Multi- channel Digital Video Recorder - Wintal
Stand alone Multi- channel Digital Video Recorder - Wintal
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ChapterⅤ IE Monitor<br />
Section 1 Introduction<br />
The DVR can be visited and controlled by IE browser. IE provides the functions, such as remote monitor,<br />
local record, PTZ control, Remote control, etc.<br />
Section 2 Installation Requirements<br />
Requirements for the PC hardware for monitoring, through IE access under the normal condition:<br />
CPU: Interl pentium4 2.0GHz and higher<br />
Ram: DDR 512MB and higher<br />
<strong>Video</strong> card: independent video card with 64M video memory and higher<br />
Network card: 100M<br />
IE version: support IE6.0 and higher<br />
Support system: support windowsXP, windows2000 and higher<br />
Install DirectX9.0 or higher version, adjust hardware acceleration to highest.<br />
Section 3 Network Connection Operation<br />
1. Insure DVR connect the network correctly<br />
2. Using ping ***.***.***.***(DVR IP), check if the network connect correctly.<br />
3. Make sure Web-client net normally used, the user has to insure http port communicate normally.<br />
4. Install the ―DVR_WEB_X.XX.XX.msi‖ in CD. (X.XX.XX is version number)<br />
5. Input http:// and host IP address and http port in IE address bar. For example: if host IP address is<br />
―10.0.0.124‖ and http port is 998 then input http://10.0.0.124:998 in IE address bar.<br />
Note: If you have not installed “DVR_WEB_X.XX.XX.msi” to your PC which burned in CD, there<br />
will be a attention for installing ActiveX plug-in software in IE when remote access DVR, install<br />
it.<br />
66
Change language