SAE J1939 - esd electronics, Inc.

More documents

Recommendations

Info

SAE J1939 – Network Topology • Each bus segment should be terminated by resistors, typically 120 Ω • Termination resistors should always be on both ends of the bus • Dividing network into sub-networks may be necessary (e.g. for truck and trailer) • Segmentation requires bridges © esd electronics, Inc. • 525 Bernardston Road • Greenfield, MA 01301 Page 46
J1939/13 Off-Board Diagnostic Connector J1939/13 defines a standard connector for diagnostic purpose. The connector is a Deutsch HD10 - 9 – 1939 (9 pins, round connector). © esd electronics, Inc. • 525 Bernardston Road • Greenfield, MA 01301 Page 47
Page 1 and 2: SAE J1939 Serial Control and Commun
Page 3 and 4: esd electronics provides: • CAN H
Page 5 and 6: SAE J1939 Applications J1939-based
Page 7 and 8: SAE J1939 - Quick Reference J1939 t
Page 9 and 10: J1939 Specifics: SAE J1939 - Quick
Page 11 and 12: SAE J1939 - Standards Collection J1
Page 13 and 14: SAE J1939 - Message Format © esd e
Page 15 and 16: SAE J1939 - Parameter Group Number
Page 17 and 18: SAE J1939 - PGNs and SPNs © esd el
Page 19 and 20: SAE J1939 - PGNs and SPNs SPN 110 E
Page 21 and 22: SAE J1939 - Proprietary Parameter G
Page 23 and 24: SAE J1939 - Parameter Group Number
Page 25 and 26: SAE J1939 - Source Address • Sour
Page 27 and 28: SAE J1939 - Request Message Paramet
Page 29 and 30: SAE J1939 - Multi-Packet Transport
Page 31 and 32: Parameter Group Name Parameter Grou
Page 33 and 34: SAE J1939 - Broadcast Data Transfer
Page 35 and 36: SAE J1939 - Network Management •
Page 37 and 38: SAE J1939 - Address and NAME • SA
Page 39 and 40: SAE J1939 - Preferred Addresses Ind
Page 41 and 42: SAE J1939 - Address Claiming Two po
Page 43 and 44: SAE J1939 - Address Claiming CAN Me
Page 45: SAE J1939 - Network Topology • EC
Page 49: Literature Literature on Controller

SAE J1939 - esd electronics, Inc.

Create successful ePaper yourself

Delete template?

Save as template?