User Manual - Visit Static.highspeedbackbone.net

(a) On the “Buttons” tab, un-tick the “Auto Setting” box to remove the former value.
(b) Click the “Adjust” button. Then follow the on-screen instructions for adjustment. Tap the “OK”
button when the “OK” message appears.
(c) Ticking the “Auto Setting” box will detect the new pen offset value automatically when the
system is restarted.
(3) Click Pressure
(a) On the “Buttons” tab, move the slider up and down to adjust the pen pressure from level 0 to
level 8 (level 0 is the lowest, and level 8 is the highest)
27