NetCOBOL for SPARC Architecture SAF Subroutines User's Guide

28 Chapter 3. How to Use SAF Subroutines
• COBW3-SEARCH-LENGTH [Optional]
Set the character length of a value with a valid space at the end to the number
of bytes including the space.
Value Meaning
0 The length to the last character, excluding the space, is checked.
1 to 1024 Values of the specified character length are searched for.
• COBW3-NUMBER [Optional]
Set the sequential order of a value to be searched for if there are several
equivalent values in the web parameter.
Condition-name Value Meaning
COBW3-NUMBER-INIT 1 The value found first is selected.
- - - - - 2 to 9999 The value of the specified occurrence is
searched for.
Processing Result Data:
• COBW3-SEARCH-FLAG
Condition-name Value Meaning
COBW3-SEARCH-FLAG
-NON
"0" No applicable values exist.
COBW3-SEARCH-FLAG
-EXIST
"1" Applicable values exist.
Output Processing Results
COBW3_PUT_HEAD
This subroutine outputs a specified header.
When an HTML document designed for processing result output (prototype file) is
used, the header is output using the text/html SAF subroutine. Thus, it is
unnecessary to use this subroutine to output the header. Use this subroutine only to
output an non HTML document file (such as a plane text) or application generated
header.
Note: Use this subroutine before using COBW3_PUT_HTML or COBW3 PUT TEXT.
If it is used after COBW3_PUT_HTML or COBW3_PUT_TEXT, the information
becomes invalid as a header.
Do not change the value after a non-default value is set in COBW3-CONTENT-TYPE
or COBW3-STATUS-CODE.
Format:
CALL “COBW3_PUT_HEAD” USING COBW3.