NetCOBOL for SPARC Architecture SAF Subroutines User's Guide

Format:
Chapter 4. Generating and Executing a Web Application 79
Service [type="MIME type"] fn="COBOL_Perform" app="DLL name,
entry-name"
[sev="log output severity of SAF director"]
Parameters:
•
•
app
Specify the .DLL name and an entry-name of the COBOL application to be
executed. Specify an absolute path as a DLL name in the same way as in
COBOL_Init.
sev
Specify the severity of log information to be output by the SAF director. The
following values can be specified. If any value besides those is specified, or
when nothing is specified, it is regarded as 0 specified.
0 Only fatal error messages are output.
1 In addition to fatal messages, severe error messages are output.
2 In addition to severe messages, warning messages are output.
3 In addition to warning messages, a trace of the SAF Director is output.
The log information that is output by the SAF director is recorded in the same place
as the error log of NES. To view the SAF director and NES error logs, use the
administration page of the NES for reference.
Notes: Each specification of severity by sev is valid in each COBOL_Perform. This
specification has nothing to do with the severity (env) specified in COBOL_Init.
The severity of log information to be specified here does not have any effect on the
log information that is output by SAF subroutine. For the log information that is
output by the SAF subroutine, see "Environment Variable Setup for SAF Subroutines".
As more logging is enabled, the slower the SAF Director runs . Specify the value
needed to log only as much detail as required. We do not recommend specifying 3
unless all other options are insufficient.
Note: For other parameters that can be specified on “Service” lines, see the NES
manual.